Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

About the Breakout Profiles Page

To access this page, click Configuration > SD-WAN > Breakout Profiles.

You can use the Breakout Profiles page to view existing breakout profiles, add local, backhaul, and cloud breakout profiles, edit breakout profiles, and delete breakout profiles. You can also add settings for cloud breakout, edit cloud breakout settings, assign the settings to one or more sites, detach the settings from one or more sites, and delete the settings.

The breakout profiles are displayed on the Breakout Profiles tab and the cloud breakout settings are displayed on the Cloud Breakout Settings tab.

Tasks You Can Perform

You can perform the following tasks from this page:

Breakout Profiles Field Descriptions

Table 221: Breakout Profiles Field Descriptions

Field

Description

Displayed On

Name

Name of the breakout profile.

Breakout Profiles page (Breakout Profiles tab)

Detail for Breakout-Profile-Name pane

Type

Indicates whether the breakout profile is for local breakout (underlay) or backhaul (central breakout) or cloud breakout.

Breakout Profiles page (Breakout Profiles tab)

Detail for Breakout-Profile-Name pane

Description

Description of the breakout profile.

Breakout Profiles page (Breakout Profiles tab)

Path Preference

Indicates the preferred path to be used for breakout traffic:

  • MPLS

  • Internet

  • Any, which indicates no preference.

Breakout Profiles page (Breakout Profiles tab)

Added by

Username of the user who added the breakout profile.

Breakout Profiles page (Breakout Profiles tab)

FqName

Internal name of the breakout profile.

Breakout Profiles page (Breakout Profiles tab)

Rate Limiting

Indicates whether rate limiting is enabled or disabled for the breakout profile.

Detail for Breakout-Profile-Name pane

Downstream Rate

Indicates the maximum downstream rate (in Kbps) for all cacheable applications associated with the breakout profile.

Detail for Breakout-Profile-Name pane

Downstream Burst Size

Indicates the maximum downstream burst size (in bytes) for all cacheable applications associated with the breakout profile.

Detail for Breakout-Profile-Name pane

Upstream Rate

Indicates the maximum upstream rate (in Kbps) for all cacheable applications associated with the breakout profile.

Detail for Breakout-Profile-Name pane

Upstream Burst Size

Indicates the maximum upstream burst size (in bytes) for all cacheable applications associated with the breakout profile.

Detail for Breakout-Profile-Name pane

Loss Priority

Indicates the loss priority associated with the breakout profile. The loss priority determines which packets are dropped or retained when network congestion occurs.

Detail for Breakout-Profile-Name pane

Cloud Breakout Settings Field Descriptions

Table 222: Cloud Breakout Settings Field Descriptions

Field

Description

Displayed On

General  

Name or

Profile-Name

Name of the cloud breakout setting.

Breakout Profiles page (Cloud Breakout Settings tab)

Detail for Cloud-Breakout-Setting-Name pane

Tunnel Type

Overlay tunnel type (IPSEC or GRE) used to break out traffic to the cloud breakout node.

Breakout Profiles page (Cloud Breakout Settings tab)

Detail for Cloud-Breakout-Setting-Name pane

Primary Gateway

IPv4 address of the primary cloud breakout node.

Breakout Profiles page (Cloud Breakout Settings tab)

Detail for Cloud-Breakout-Setting-Name pane

Primary Link Type

Preferred type of WAN link to be used for breaking out the traffic to the primary cloud breakout node.

If a WAN link type that matches the preferred path is enabled for breakout, then that WAN link type is used for breakout traffic.

Breakout Profiles page (Cloud Breakout Settings tab)

Detail for Cloud-Breakout-Setting-Name pane

Secondary Gateway

IPv4 address of the secondary cloud breakout node.

Breakout Profiles page (Cloud Breakout Settings tab)

Detail for Cloud-Breakout-Setting-Name pane

Secondary Link Type

Preferred type of WAN link to be used for breaking out the traffic to the secondary cloud breakout node.

Breakout Profiles page (Cloud Breakout Settings tab)

Detail for Cloud-Breakout-Setting-Name pane

Sites

If the cloud breakout settings are assigned to one or more sites, the names of the sites are displayed; if not, this field is blank.

Breakout Profiles page (Cloud Breakout Settings tab)

Provider

Name of the cloud service provider.

Detail for Cloud-Breakout-Setting-Name pane

IPSEC Configuration Parameters  

Domain Name

The domain name to generate the fully qualified domain name (FQDN) that is used by the cloud security providers to identify the IPsec tunnel end points. The domain name is populated based on the customer domain name that you provided while onboarding the tenant (Administration Portal > Tenants > Add Tenant > Tenant Properties > Cloud Breakout Settings).

Detail for Cloud-Breakout-Setting-Name pane

Phase 1 Parameters

  

Encryption Type

The encryption type for IPsec proposals.

Detail for Cloud-Breakout-Setting-Name pane

Authentication Type

The IPsec authentication algorithm for security association.

Detail for Cloud-Breakout-Setting-Name pane

DH Group

The Diffie-Hellman (DH) group.

Detail for Cloud-Breakout-Setting-Name pane

Phase 2 Parameters

  

Encryption Type

The encryption type for IPsec proposals.

Detail for Cloud-Breakout-Setting-Name pane

Authentication Type

The IPsec authentication algorithm for security association.

Detail for Cloud-Breakout-Setting-Name pane

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit