Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

About the Single NAT Policy Page

To access this page, select Configuration > NAT > NAT Policies. The NAT Policies page appears displaying all existing NAT policies. Click on a NAT policy to view the rules associated with it.

The Single NAT Policy page displays the NAT rules associated with the NAT policy, and keep track of the number and order of rules for each policy. You can also create a new NAT rule, modify the configured parameters of existing NAT rules, clone, and delete NAT rules, using this page.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 243 provides information on the fields in the NAT rules contained within this NAT policy.

Table 243: Fields on the Single NAT Policy Page

Field

Description

Source

Displays the source endpoint on which the NAT policy applies. A source endpoint can be an address, protocol, interface, routing instance, zone, or port.

Destination

Displays the destination endpoint on which the NAT policy applies. A destination endpoint can be an address, interface, service, routing instance, zone, or port.

Translation

Displays the translation type applied on the incoming or outgoing traffic.

Details

Displays the type of NAT rule. A NAT rule can be of type source, static, or destination.

The Total Rules field on the top right corner of the page displays the total number of rules associated with the NAT policy. The Undeployed field displays the number of undeployed rules associated with the NAT policy. To deploy undeployed rules, click Deploy. See Deploying NAT Policy Rules.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit