Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Editing, Cloning, and Deleting UTM Profiles

You can edit, clone, and delete UTM profiles from the UTM Profiles page. This topic has the following sections:

Editing UTM Profiles

Procedure

To modify the parameters configured for a UTM profile:

Note You cannot modify the default profiles already present in the system.

  1. Select Configuration > Unified Threat Mgmt > UTM Profiles in Customer Portal.

    The UTM Profiles page appears, displaying the existing UTM profiles.

  2. Select the UTM profile that you want to edit and click the edit icon (pencil). Alternatively, right-click a profile and select Edit Profile.

    The Edit UTM Profiles page appears, displaying the same fields that are presented when you create a UTM profile.

  3. Modify the UTM profile fields as needed.
  4. Click OK to save your changes.

    You are taken to the UTM Profiles page. A confirmation message appears indicating the status of the edit operation.

Cloning UTM Profiles

Cloning enables you to easily create a new UTM profile based on an existing one.

Procedure

To clone a UTM profile:

  1. Select Configuration > Unified Threat Mgmt > UTM Profiles in Customer Portal.

    The UTM Profiles page appears, displaying the existing UTM profiles.

  2. Select the UTM profile that you want to clone and then select More > Clone. Alternatively, right-click a profile and select Clone.

    The Clone UTM Profiles page appears, displaying the same fields that are presented when you create a UTM profile.

  3. Modify the UTM profile fields as needed.
  4. Click OK to save your changes.

    You are taken to the UTM Profiles page. A confirmation message appears, indicating the status of the clone operation.

Deleting UTM Profiles

Note Before deleting a UTM profile, ensure that the profile is not used in a firewall policy intent. If you try to delete a profile that is used in a firewall policy intent, an error message is displayed.

Procedure

To delete one or more UTM profiles:

  1. Select Configuration > Unified Threat Mgmt > UTM Profiles in Customer Portal.

    The UTM Profiles page appears, displaying the existing UTM profiles.

  2. Select one or more UTM profiles that you want to delete and click the delete icon (X). Alternatively, right-click a profile and select Delete Profile.

    An alert message appears, asking you to confirm the delete operation.

  3. Click Yes to delete the selected UTM profiles.

    A confirmation message appears, indicating the status of the delete operation.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit