Managing a Single Site

Procedure

• On the Overview tab, view detailed information about the tenant site, such as geographical location, connection details, device details, alarms, and alerts.
• On the WAN tab, view detailed information about the WAN links, such as topology of the hub-site WAN links, total number of hub and spoke links, total number of applications, link utilization details, link metrics based on throughput, and the maximum bandwidth capacity of a WAN link in a site. Hover over the WAN link to view bandwidth capacity.

  You can add or delete a mesh tunnel between a source site and destination site. For more information about creating and deleting mesh tunnels between a source site and destination site, see Adding On-Demand Mesh Tunnels and Deleting On-Demand Mesh Tunnels.

  For sites owned by a tenant in a full mesh topology, you can view all the WAN link connections between WAN interfaces in all the sites. Click a site to see all connections between its WAN interfaces.

  Note This tab is available only for SD-WAN sites.

• On the Services tab, view services, deploy network services, start a service, and disable services for a tenant site. You can also view the topology of the site.

  To deploy a network service to a site, select the service, and then select an attachment point in the topology graphic. Alternatively, drag and drop the network service to an attachment point in the topology graphic.

  Note This tab is available only for SD-WAN sites.

• On the Policies tab, view the following details:

  Note This tab is available only for SD-WAN sites.

  • List of all policies applicable to a tenant site. Click the policy name to view the rules that are applicable for the tenant site. Click the edit icon at the end of the row to edit a policy. You are taken to the Configuration > Policy page, where you can edit the policies.

  • Details about the tenant user who last updated the policy.

  • Time when the policy was last updated.

  • Deployment status of the policy—deployed or not deployed.

  • Number of rules applicable to the site compared to the total number of rules applicable to the tenant.

• On the LAN tab, view, create, deploy, and delete a LAN segment. In addition, you can use this tab to reassign a LAN segment to a different department. See Managing LAN Segments on a Tenant Site. You can also view all the devices in a LAN segment for an SD-LAN site and deploy one or more of these devices.

  Note Departments are not applicable for SD-LAN sites.

• On the Devices tab, view and manage the devices in a site. See About the Devices Page.

  Note If you have added only one Virtual Chassis to an SD-LAN site and want to delete the Virtual Chassis, delete the site from the Site Management page.

  If you have more than one Virtual Chassis in your site, you can delete the Virtual Chassis from the Devices tab.

  To delete one or more EX Series switches from an SD-LAN site or to delete an EX Series switch from an SD-WAN site or Next-Generation Firewall site that has LAN capability:

  Procedure

  1. Select the devices that you want to delete and click the Delete icon.

     The Delete Switch Options page appears.

  2. (Default) Select the Load Recovery Configuration option

     The base configuration of the switches is restored.

  3. Click OK.

     A job is initiated to delete the switches.

     If the job is successful, the switches are deleted from the site.

Related Documentation

• About the Sites Page

• Dynamic Mesh Tunnels Overview