Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

Manually Activating a Switch

You can manually activate a switch if you have disabled automatic activation while onboarding the switch to CSO.

Note Before activating, ensure that the switch is powered on and connected to the CPE or firewall (if the switch is behind a CPE or firewall).

To manually activate the switch:

Procedure

  1. Select Resources > Site Management.

    The Sites page appears.

  2. On the Sites page, click on the site that you want to activate.

    The detailed view of the site appears.

    Note You can activate a site that is in the CONFIGURED state.

  3. Click the Devices tab.
  4. Select the switch that you added to the site and click Activate Device to activate the switch.

    The Activate Device page appears.

  5. On the Activate Device page, enter the activation code for the switch. The activation code must match the activation code that you provided during the site addition workflow.
  6. Click Next.

    The progress of switch activation is displayed.

  7. After the switch is activated, click OK.

    The Sites page appears. The status of the switch is set to PROVISIONED if the switch is successfully activated. After the switch is activated, you can manage the switch by using CSO.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit