Help Center User GuideGetting StartedFAQ
 
X
User Guide
Getting Started
FAQ
Contents  

About the Devices Page

To access this page, click Resources > Devices.

You can use the Devices page to view the list of available CPE devices at the customer premises. You can also view information about each CPE device in the network.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 83: Widgets on the Devices Page

Widget

Description

CPE by Status

Displays the management status of the CPE devices deployed in the cloud.

  • Pending Activation—Number of CPE devices that are yet to connect to the regional server.

  • Activation Failed—Number of CPE devices that could not connect to the regional server.

  • Expected—Number of CPE devices that are yet to connect to the regional server.

  • Active—Number of CPE devices that have downloaded images, but are not yet configured.

  • Provisioned—Number of CPE devices on which IPsec tunnels are fully operational.

  • Provision Failed—Number of CPE devices failed as the vSRX was not instantiated properly.

Table 84: Fields on the Devices Page

Field

Description

Device Name

Displays the name of the device.

Example: sunny-NFX-250

Tenant

Displays the name of the tenant.

Example: tenant-blue

Site Name

Displays the name of the tenant site.

Example: site-blue-white

Management Status

Displays the management status of the CPE devices deployed in the cloud.

  • EXPECTED—Regional server has the activation details for the CPE device, but CPE device has not yet established a connection with the server.

  • DEVICE DETECTED—Device is configured and is reachable by CSO. After the user enters the activation code for the device, the activation code is validated and device is authenticated.

  • RMA—CPE device has been tagged for RMA as a result of the user applying the Initiate RMA action on the device.

  • ACTIVE—ZTP is initiated, CPE device has downloaded images, but not yet configured, and stage-1 configuration is pushed to the device.

  • PROVISIONED—ZTP is complete, and IPsec tunnel is established and operational on the device.

  • PROVISION_FAILED—Multiple factors lead to failure in provisioning a device. If any of the steps in ZTP fails or if any process fails as a part of device activation, then provision fails. For example, CPE device provisioning fails when the vSRX is not instantiated properly.

Model

Displays the name of the device model.

Example: NFX

Active Services

Displays the number of services that are activated for the device.

Example: 3

Operational Status

Displays whether the device is up or down.

Location

Displays the name of the location.

Example: San Jose, CA

Status Message

Displays the latest status message.

Example: IPsec provision success

WAN Links

Displays the number of WAN links.

Example: 2

POP Name

Displays the name of the POP.

Example: pop_blue

Image Name

Displays the name of the device image file.

Example: install_nfx_fmpm_agent_1_0.sh

OS Version

Displays the Junos OS Release version.

Example: 15.1X49-D40

Serial Number

Displays the serial number of the device.

Example: XXXXXXXXXXXX

UUID

Displays the universally unique identifier (UUID) of the device.

Example: xxxxxxxx-xxxx-xxxx-xxx-xxxxxxxxxxxx

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit