Cisco CSR-1000v VNF Configuration Settings
You can configure the Cisco CSR-1000v virtualized network function (VNF) from Configuration > Network Services > Service Name > Overview > Service Configuration. Your service provider usually configures base settings for the virtual machine (VM) in which the virtualized network function (VNF) resides and you configure settings for the service, such as policies. Use the information in the following tables to provide values for the available settings:
Table 1 shows the base settings you can configure for the virtual machine (VM) that contains the VNF.
Your service provider usually configures the base settings and you should not need to change them.
Table 2 shows the firewall settings you can configure.
Table 1: Fields for the CSR-1000v Base Settings
Specify the hostname of the VM.
Specify the IPv4 loopback IP address.
Specify the fully qualified domain names (FQDNs) or IP addresses of one or more DNS name servers.
Specify the FQDNs or IP addresses of one or more NTP servers.
Table 2: Fields for the CSR-1000v Firewall Settings
Specify the identifier of the interface that transmits data to the host.
Specify the identifier of the interface receiving data transmitted by the host.
Left to Right Allowed Apps
Select the applications from the drop-down list for which the policy is enforced in outgoing packets. The following applications are available:
Example: http, https
Right to Left Allowed Apps
Select the application from the drop-down list for which the policy is enforced for incoming packets. The following applications are available:
Example: ftp, udp