Help Center User GuideGetting StartedFAQ
User Guide
Getting Started

Viewing the Stage-1 Configuration

Stage1 configuration refers to the settings (such as name server, timezone, radius-server, interfaces, protocols, firewalls, and VLANs), that are configured on a device in order to deploy the device in a network. The Stage1 configuration is pushed to a device during the zero-touch provisioning (ZTP) process. You can view the Stage1 configuration after the site is configured, that is, the status of the site is CONFIGURED and if the ZTP_ENABLED attribute is disabled on the device profile.

Note You cannot view the Stage1 configuration when the site status is PROVISIONED.

To view the stage1 configuration pushed on to a CPE device:


  1. Click Sites > Site Management.

    The Sites page appears.

  2. Select a site and click More > Stage1 Config.

    The Stage1 config page appears displaying the Stage1 configuration applied on the device.

  3. After you view the configuration, click OK. You are returned to the Sites page.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support