You add a local service edge site when the site is directly connected to the Internet or when you access the Internet through a corporate VPN. You use the Sites page to add the local service edge site.
To add a local service edge site:
The Sites page appears.
The Add Local Service Edge site page appears.
Table 170: Fields on the Add Local Service Edge Site Page
Field | Description |
---|---|
Site Information | |
Site Name | Enter a site name. You can use any number of alphanumeric characters, including special characters. The maximum length is 15 characters. |
Address | |
Street Address | Enter the street address of the site. |
City | Enter the city where the site is located. |
State/Province | Enter the state or province where the site is located. |
ZIP/Postal Code | Enter the postal code for the locality of the site. |
Country | Select the country name from the drop-down list. |
Contact Information | |
Contact Name | Enter the name of a contact person for the site. |
Enter the e-mail ID of the contact person at the site. | |
Phone | Enter the phone number of the contact person at the site. |
Configuration | |
Service POP | Select the name of the point of presence (POP) for the site. A network point of presence is a location at which a service provider instantiates a network function, such as a virtualized network function (VNF). |
VIM | Select a virtualized infrastructure manager (VIM). The VIM controls and manages the compute, storage, and network resources in the NFV infrastructure. The VIM also collects and forwards performance measurements and events. |
Resource Pool | Select a resource pool for the VIM. Resource pools identify the compute zones for the VIM for the POP. |
Route Target | Enter a route target for the virtual network. Example: 64512:10000 |
SDN Gateway Router | Click the toggle button to enable SDN gateway router that is configured in the POP. The SDN gateway router provides a Layer 3 routing service to customer sites in a centralized deployment.
|
PE Router | Specify the name of the device. |
VRF Name | Specify the name of the virtual routing and forwarding (VRF) instance for the tenant. |
Service Attachment Points | |
Local Internet Breakout | Click the toggle button to enable or disable local Internet breakout to the site. |
Left Subnet Prefix | Select one or more IPv4 prefixes for the management network. |
Right Virtual Network Name | Select the network to which the site transmits Internet traffic. |
Right Network - Internet Information | |
Internet Network Name | Select the network to which the site transmits Internet traffic. |
Site to VPN | Click the toggle button to enable VPN. |
Left Subnet Prefix | Select one or more IPv4 prefixes for the management network. |
Right Virtual Network Name | Select the network to which the site transmits Internet traffic. |
The newly added local service edge site is displayed on the Sites page.