Configuring a Site
In Cloud CPE Solution Release 3.1, you can specify the underlay configuration of a hub device by using the Configure Site feature on the Site Management page.
To configure a site:
- Click the Configure Site button on the Sites > Site Management page.
The Configure Site Site Name page is displayed.
- Complete the configuration settings according to the guidelines
provided in Table 1.
Table 1: Fields on the Configure Site Page
Field
Description
Management Region
Displays the regional server with which the CPE device communicates based on the information in the device profile. This field cannot be modified.
Selected Plan
Displays the connection plan that you selected when you created the site. This field cannot be modified.
Hub Site
Select the hub that the site should connect to.
Management Connectivity VLAN ID
Specify the Operation, Administration, and Maintenance (OAM) VLAN ID for in-band management of the site.
IP Prefix
Specify one or more prefixes for the site management network. You can specify IPv4 or IPv6 addresses.
Example: 198.51.100.0/24
Gateway IP
Specify the IP address of the default route for the management network. You can use an IPv4 or IPv6 address.
WAN Interface
Displays the interface name configured in the device profile. This field cannot be modified.
Link Type
Displays the link type (MPLS or Internet) configured in the device profile. This field cannot be modified.
Address Assignment
Select the method of IP address assignment. Select DHCP to assign IP addresses by using a DHCP sever or Static to assign a static IP address.
Traffic Type
Select the traffic type. You specify whether you want to use the WAN link to transmit only data traffic or both management traffic and data traffic.
Tunnel Type
Select the tunnel type—IPsec or GRE and IPsec.
Peer Device
Displays the hub device to which the site is connected.
Interface Name
Select the name of the interface of the hub device to which the MPLS or Internet link is connected.
Serial Number
Enter the serial number of the CPE device. Serial numbers are case-sensitive.
Activation Code
Enter the code to activate the device.
- Click OK.
