Viewing Configuration for CNI for Kubernetes
Use the verification steps in this topic to view and verify your configuration of Contrail Container Network Interface (CNI) for Kubernetes.
View Pod Name and IP Address
Use the following command to view the IP address allocated to a pod.
[root@device ~]# kubectl get pods --all-namespaces -o wide NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE default client-1 1/1 Running 0 19d 10.47.25.247 k8s-minion-1-3 default client-2 1/1 Running 0 19d 10.47.25.246 k8s-minion-1-1 default client-x 1/1 Running 0 19d 10.84.21.272 k8s-minion-1-1
Verify Reachability of Pods
Perform the following steps to verify if the pods are reachable to each other.
- Determine the IP address and name of the pod.
[root@device ~]# kubectl get pods --all-namespaces -o wide NAME READY STATUS RESTARTS AGE IP NODE example1-36xpr 1/1 Running 0 43s 10.47.25.251 b3s37 example2-pldp1 1/1 Running 0 39s 10.47.25.250 b3s37
- Ping the destination pod from the source pod to verify
if the pod is reachable.
root@device ~]# kubectl exec -it example1-36xpr ping 10.47.25.250 PING 10.47.25.250 (10.47.25.250): 56 data bytes 64 bytes from 10.47.25.250: icmp_seq=0 ttl=63 time=1.510 ms 64 bytes from 10.47.25.250: icmp_seq=1 ttl=63 time=0.094 ms
Verify If Isolated Namespace-Pods Are Not Reachable
Perform the following steps to verify if pods in isolated namespaces cannot be reached by pods in non-isolated namespaces.
- Determine the IP address and name of a pod in an isolated
namespace.
[root@device ~]# kubectl get pod -n test-isolated-ns -o wide NAME READY STATUS RESTARTS AGE IP NODE example3-bvqx5 1/1 Running 0 1h 10.47.25.249 b3s37
- Determine the IP address of a pod in a non-solated namespace.
[root@device ~]# kubectl get pods NAME READY STATUS RESTARTS AGE example1-36xpr 1/1 Running 0 15h example2-pldp1 1/1 Running 0 15h
- Ping the IP address of the pod in the isolated namespace
from the pod in the non-isolated namespace.
[root@device ~]# kubectl exec -it example1-36xpr ping 10.47.25.249 --- 10.47.255.249 ping statistics --- 2 packets transmitted, 0 packets received, 100% packet loss
Verify If Non-Isolated Namespace-Pods Are Reachable
Perform the following steps to verify if pods in non-isolated namespaces can be reached by pods in isolated namespaces.
- Determine the IP address of a pod in a non-isolated namespace.
[root@device ~]# kubectl get pods -o wide NAME READY STATUS RESTARTS AGE IP NODE example1-36xpr 1/1 Running 0 15h 10.47.25.251 b3s37 example2-pldp1 1/1 Running 0 15h 10.47.25.250 b3s37
- Determine the IP address and name of a pod in an isolated
namespace.
[root@device ~]# kubectl get pod -n test-isolated-ns -o wide NAME READY STATUS RESTARTS AGE IP NODE example3-bvqx5 1/1 Running 0 1h 10.47.25.249 b3s37
- Ping the IP address of the pod in the non-isolated namespace
from a pod in the isolated namespace.
[root@device ~]# kubectl exec -it example3-bvqx5 -n test-isolated-ns ping 10.47.25.251 PING 10.47.25.251 (10.47.25.251): 56 data bytes 64 bytes from 10.47.25.251: icmp_seq=0 ttl=63 time=1.467 ms 64 bytes from 10.47.25.251: icmp_seq=1 ttl=63 time=0.137 ms ^C--- 10.47.25.251 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.137/0.802/1.467/0.665 ms
Verify If a Namespace is Isolated
Namespace annotations are used to turn on isolation in a Kubernetes namespace. In isolated Kubernetes namespaces, the namespace metadata is annotated with the opencontrail.org/isolation : true annotation.
Use the following command to view annotations on a namespace.
[root@a7s16 ~]# kubectl describe namespace test-isolated-ns Name: test-isolated-ns Labels: <none> Annotations: opencontrail.org/isolation : true Namespace is isolated Status: Active
