ON THIS PAGE
This topic provides instructions to upload a new device image to the Contrail Networking fabric.
Upload a New Device Image
Follow these steps to upload a new device image:
- Click Infrastructure>Fabrics>Images.
The Device Images page is displayed. See Figure 1.
- Click Upload.
The Upload Image pop-up is displayed. See Figure 2.
- Enter the following information given in Table 1.
Table 1: Upload Image Details
Enter a name for the device image.
Pick a file
Click Upload and navigate to the local directory and select the device image file.
Click Open to confirm selection.
Enter name of the vendor.
Select the device family from the list.
Select the hardware platforms that are compatible with the image file, from the list.
Enter the OS version.
(Optional) Enter MD5 checksum value.
(Optional) Enter SHA1 checksum value.
The images that you upload can not have the same vendor name, device family, supported platforms, or OS version. The Contrail Command UI will not allow you to upload two image files with the same field information.
- Click Upload to begin uploading the device
You are redirected to the Device Images page. When the image upload is complete, the device image is listed in Device Images page.