Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Debugging BGP Peering and Route Exchange in Contrail

 

Use the troubleshooting steps and guidelines in this topic when you have errors with Contrail BGP peering and route exchange.

Example Cluster

Examples in this document refer to a virtual cluster that is set up as follows:

Verifying the BGP Routers

Use this procedure to launch various introspects to verify the setup of the BGP routers in your system.

Use this procedure to launch various introspects to verify the setup of the BGP routers in your system.

  1. Verify the BGP routers.

    All of the configured control nodes and external BGP routers are visible from the following location, shown using the sample node setup.

    http: //<host ip address>:8082/bgp-routers

    Note

    Throughout this procedure, replace <host ip address> with the correct location for your system to see the setup in your system.​

    Figure 1: Sample Output, BGP Routers:
    Sample Output, BGP Routers:
  2. Verify the BGP peering.

    The following statement is entered to check the bgp_router_refs object on the API server to validate the peering on the sample setup.

    http: //<host ip address>:8082/bgp-router/1da579c5-0907-4c98-a7ad-37671f00cf60

    Figure 2: Sample Output, BGP Router References:​
    Sample Output, BGP Router References:​
  3. Verify the command line arguments that are passed to the control-node.

    On the control-node, use ps aux | grep control-node to see the arguments that are passed to the control-node.

    Example

    The hostname is the bgp-router name. Ensure that the bgp-router config can be found for the hostname, using the procedure in Step 1.

  4. Validate the BGP neighbor config and the BGP peering config object.

    http: //<host ip address>:8083/Snh_ShowBgpNeighborConfigReq?

    Figure 3: Sample Output, BGP Neighbor Config:
    Sample Output, BGP Neighbor Config:

    http: //<host ip address>:8083/Snh_ShowBgpPeeringConfigReq?

    Figure 4: Sample Output, BGP Peering Config:
    Sample Output, BGP Peering Config:
  5. Check the BGP neighbor states on the sample setup.

    http: //<host ip address>:8083/Snh_BgpNeighborReq?ip_address=&domain=

    Figure 5: Sample Output, BGP Neighbor States:
    Sample Output, BGP Neighbor States:

    If the peer is not in an established state, check the last_error and the flap_count. Debug the BGP state machine by using information displayed in the output, such as last_state and last_event.

    Note

    The image displayed is truncated to fit this page. On the console screen you can scroll horizontally to see more columns and data.

Verifying the Route Exchange

The following two virtual networks are used in the sample debugging session for route exchange.

Example Procedure for Verifying Route Exchange

  1. Validate the presence of the routing instance for each virtual network in the sample system.

    http ://<host ip address>:8083/Snh_ShowRoutingInstanceReq?name=

    Note

    Throughout this example, replace <host ip address> with the correct location for the control node on your system.

    Figure 6: Sample Output, Show Routing Instance:
    Sample Output, Show Routing Instance:

    In the sample output, you can see the import_target and the export_target configured on the routing instance. Also shown are the xmpp peers (vroutes) registered to the table.

    The user can click on the inet table of the required routing instance to display the routes that belong to the instance.

    Use the information in Step 2 to validate a route.

  2. Validate a route in a given routing instance in the sample setup:

    http ://<host ip address>:8083/Snh_ShowRouteReq?x=default-domain:demo:vn1:vn1.inet.0

    In the following sample output (truncated), the user can validate the BGP paths for the protocol and for the source of the route to verify which XMPP agent or vRouter has pushed the route. If the path source is BGP, the route is imported to the VRF table from a BGP peer, either another control-node or an external bgp router such as an MX Series router. BGP paths are displayed in the order of path selection.

    Figure 7: Sample Output, Validate Route:
    Sample Output, Validate Route:

  3. Validate the l3vpn table.

    http: //<host ip address>:8083/Snh_ShowRouteReq?x=bgp.l3vpn.0

    Figure 8: Sample Output, Validate L3vpn Table:
    Sample Output, Validate L3vpn Table:

    The following sample output has been scrolled horizontally to display the BGP path attributes of each route. policies.

    The extended community (communities column), determines the VRF table to which this VPN route is imported. The origin_vn shows the virtual network where this route was created, information useful for applying ACL

    The label (MPLS) and tunnel encap columns can be used for debugging data path issues.

    Figure 9: Sample Output, Validate L3vpn Table, Scrolled:
    Sample Output, Validate L3vpn Table, Scrolled:

Debugging Route Exchange with Policies

This section uses the sample output and the sample vn1 and vn2 to demonstrate methods of debugging route exchange with policies.

  1. Create a network policy to allow vn1 and vn2 traffic and associate the policy to the virtual networks.
    Figure 10: Create Policy Window
    Create Policy Window
  2. Validate that the routing instances have the correct import_target configuration.

    http: //<host ip address>:8083/Snh_ShowRoutingInstanceReq?name=

    Figure 11: Sample Output, Validate Import Target:
    Sample Output, Validate Import Target:
  3. Validate that the routes are imported from VRF.

    Use the BGP path attribute to check the replication status of the path. The route from the destination VRF should be replicated and validate the origin-vn.

    Figure 12: Sample Output, Route Import:
    Sample Output, Route Import:

Debugging Peering with an MX Series Router

This section sets up an example BGP MX Series peer and provides some troubleshooting scenarios.

  1. Set the Global AS number of the control-node for an MX Series BGP peer, using the Contrail WebUI (eBGP).
    Figure 13: Edit Global ASN Window
    Edit Global ASN Window
  2. Configure the eBGP peer for the MX Series router. Use the Contrail Web UI or Python provisioning.
    Figure 14: Create BGP Peer Window
    Create BGP Peer Window

    Configuring the MX Series BGP peer with the Python provision utility:

  3. Configure a control-node peer on the MX Series router, using Junos CLI:

Debugging a BGP Peer Down Error with Incorrect Family

Use this procedure to identify and resolve errors that arise from families mismatched configurations.

Note

This example uses locations at http: //<host ip address>:. Be sure to replace <host ip address> with the correct address for your environment.

  1. Check the BGP peer UVE.

    http: //<host ip address>:8081/analytics/uves/bgp-peers

  2. Search for the MX Series BGP peer by name in the list.

    In the sample output, families is the family advertised by the peer and configured_families is what is provisioned.​ In the sample output, the families configured on the peer has a mismatch, thus the peer doesn’t move to an established state. You can verify it in the peer UVE.

    Figure 15: Sample BGP Peer UVE
    Sample BGP Peer UVE
  3. Fix the families mismatch in the sample by updating the configuration on the MX Series router, using Junos CLI:

    set protocols bgp group contrail-control-nodes family inet-vpn unicast

  4. After committing the CLI configuration, the peer comes up. Verify this with UVE.

    http: //<host ip address>:8081/analytics/uves/bgp-peers

    Figure 16: Sample Established BGP Peer UVE
    Sample Established BGP Peer UVE
  5. Verify the peer status on the MX Series router, using Junos CLI:
    run show bgp neighbor <ip address>

Configuring MX Peering (iBGP)

  1. Edit the Global ASN.
    Figure 17: Edit Global ASN Window
    Edit Global ASN Window
  2. Configure the MX Series IBGP peer, using Contrail WebUI or Python provisioning.
    Figure 18: Create BGP Peer Window
    Create BGP Peer Window

    Configuring the MX Series BGP peer with the Python provision utility:

    python ./provision_mx.py --router_name mx--router_ip <ip address> --router_asn 64512 --api_server_ip <ip address> --api_server_port 8082 --oper add --admin_user admin --admin_password <password> --admin_tenant_name admin

  3. Verify the peer from UVE.

    http ://<host ip address>:8081/analytics/uves/bgp-peers

    Figure 19: Sample Established IBGP Peer UVE
    Sample Established IBGP Peer UVE
  4. You can verify the same information at the HTTP introspect page of the control node (8443 in this example).

    http: //<host ip address>:8083/Snh_BgpNeighborReq?ip_address=&domain=

    Figure 20: Sample Established IBGP Peer Introspect Window
    Sample Established IBGP Peer Introspect Window

Checking Route Exchange with an MX Series Peer

  1. Check the route table in the bgp.l3vpn.0 table.
    Figure 21: Routing Instance Route Table
    Routing Instance Route Table
  2. Configure a public virtual network.
    Figure 22: Routing Instance Route Table
    Routing Instance Route Table
  3. Verify the routes in the public.inet.0 table.

    http: //<host ip address>:8083/Snh_ShowRouteReq?x=default-domain:admin:public:public.inet.0

    Figure 23: Routing Instance Public IPv4 Route Table
    Routing Instance Public IPv4 Route Table
  4. Launch a virtual machine in the public network and verify the route in the public.inet.0 table.

    http: //<host ip address>:8083/ Snh_ShowRouteReq?x=default-domain:admin:public:public.inet.0

    Figure 24: Virtual Machine Routing Instance Public IPv4 Route Table
    Virtual Machine Routing Instance Public IPv4 Route
Table
  5. Verify the route in the bgp.l3vpn.0 table.

    http: //<host ip address>:8083/Snh_ShowRouteReq?x=bgp.l3vpn.0

    Figure 25: BGP Routing Instance Route Table
    BGP Routing Instance Route Table

Checking the Route in the MX Series Router

Use Junos CLI show commands from the router to check the route.