Move a Device to RMA State

1. Click Infrastructure > Fabrics.

   The Fabrics page is displayed.

2. Click the name of the fabric you want to edit.

   The Fabric devices page is displayed listing all the devices configured on the fabric.

3. Select the check box next to the name of the device you want to move to the RMA state.

   You can select multiple devices at a time.

   Note

   Starting with Contrail Networking Release 1907, you can view the RMA state of a device from the Fabric Devices page. The statuses are ACTIVE and RMA.

4. Click the Return Material Authorization icon as shown in Figure 1 to move the selected device to the RMA state.

   Figure 1: Return Material Authorization Icon

   

   The following confirmation message is displayed:

   Put the selected devices into RMA state?

5. Click Confirm to move the device to RMA state.

   The device is now in RMA state.

   Once you move a device from the Active state to RMA state, any configuration that you make on the fabric does not apply to the device that is in RMA state.

6. (Optional) To move a device from RMA state back to Active state,

   1. Select the check box next to the name of the device you want to move to the Active state.
   2. Click Move Out of RMA icon as shown in Figure 2.

      Figure 2: Move Out of RMA Icon

      

      The following confirmation message is displayed:

      Reactivate selected device?

   3. Click Confirm to move the device to Active state.

      The device is now in Active state.