Metrics Collected by AppFormix
A metric is a measured value for an element in the infrastructure. AppFormix Agent collects and calculates metrics for hosts and instances. AppFormix metrics are organized into hierarchical categories based on the type of metric.
Some metrics are s of total capacity. In such cases, the category of the metric determines the total capacity by which the is computed. For instance, host.cpu.usage indicates the percentage of CPU consumed relative to the total CPU available on a host. In contrast, instance.cpu.usage is the percentage of CPU consumed relative to the total CPU available to an instance. As an example, consider an instance that is using 50% of one core on a host with 20 cores. The instance's host.cpu.usage will be 2.5%. If the instance has been allocated two cores, then its instance.cpu.usage will be 25%.
Alarms can be configured for any metric. Many metrics can also be displayed in charts. When an alarm triggers for a metric, the alarm is plotted on charts at the time of the event. In this way, metrics that cannot be plotted directly as a chart are still visually correlated in time with other metrics.
AppFormix Agent collects both raw metrics and calculated metrics. Raw metrics are values read directly from the underlying infrastructure. Calculated metrics are metrics that AppFormix Agent derives from raw metrics.
Host CPU Data Metrics
Table 1 lists the calculated metrics available for the host CPU data.
Table 1: Host CPU Data Metrics
Metric | Unit | Chart | Alarm |
---|---|---|---|
host.cpu.usage | % | x | x |
host.cpu.io_wait | % | x | x |
host.cpu.per_core.usage | % | — | x |
host.cpu.per_core.user.usage | % | — | x |
host.cpu.temperature | degree | — | x |
host.cpu.normalized_load_1m | loadavg | x | x |
host.cpu.normalized_load_5m | loadavg | x | x |
host.cpu.normalized_load_15m | loadavg | x | x |
host.cpu.cores.state_transition | 0 or 1 | — | x |
host.disk.smart.predict_failure | 0 or 1 | — | x |
host.heartbeat | 0 or 1 | — | x |
Host Disk Metrics
Table 2 lists the raw metrics available for host disk.
Table 2: Host Disk Metrics
Metric | Unit | Chart | Alarm |
---|---|---|---|
host.disk.io.read | MBps | x | x |
host.disk.io.write | MBps | x | x |
host.disk.response_time | ms | x | x |
host.disk.read_response_time | ms | x | x |
host.disk.write_response_time | ms | x | x |
host.disk.smart.hdd.command_timeout | count | — | x |
host.disk.smart.hdd.current_pending_sector_count | count | — | x |
host.disk.smart.hdd.offline_uncorrectable | count | — | x |
host.disk.smart.hdd.reallocated_sector_count | count | — | x |
host.disk.smart.hdd.reported_uncorrectable_errors | count | — | x |
host.disk.smart.ssd.available_reserved_space | count | — | x |
host.disk.smart.ssd.media_wearout_indicator | count | — | x |
host.disk.smart.ssd.reallocated_sector_count | count | — | x |
host.disk.smart.ssd.wear_leveling_count | count | — | x |
host.disk.usage.bytes | GB | x | x |
host.disk.usage.percent | % | x | x |
Host Memory Usage
Table 3 lists the raw metrics available for host memory usage.
Table 3: Metrics for Host Memory Usage
Metric | Unit | Chart | Alarm |
---|---|---|---|
host.memory.usage | % | x | x |
host.memory.dirty.rate | dirty pages/s | x | x |
host.memory.page_in_out.rate | dirty pages/s | x | x |
host.memory.page_fault.rate | dirty pages/s | x | x |
host.memory.swap.usage | dirty pages/s | x | x |
Host Mount Metrics
Table 4 lists the raw metrics available for host mount.
Table 4: Host Mount Metrics
Metric | Unit | Chart | Alarm |
---|---|---|---|
host.mount.usage | % | x | x |
host.mount.io.read | MBps | x | x |
host.mount.io.write | MBps | x | x |
host.mount.detect_change | 1 or 0 | — | x |
host.mount.usage.bytes | GB | x | — |
Host Network Data
Table 5 lists the raw metrics available for host network data.
Table 5: Host Network Data Metrics
Metric | Unit | Chart | Alarm |
---|---|---|---|
host.network.ingress.bit_rate | Mbps | x | x |
host.network.egress.bit_rate | Mbps | x | x |
host.network.ingress.packet_rate | packets/s | x | x |
host.network.egress.packet_rate | packets/s | x | x |
host.network.ingress.errors | errors/s | x | x |
host.network.egress.errors | errors/s | x | x |
host.network.ingress.drops | drops/s | x | x |
host.network.egress.drops | drops/s | x | x |
host.network.ipv4tables.rule_count | count | x | x |
host.network.ipv6tables.rule_count | count | x | x |
openstack.host.disk_gb.allocated.count | count | x | x |
openstack.host.disk_gb.allocated.percentage | percentage | — | x |
openstack.host.memory_mb.allocated.count | count | x | x |
openstack.host.memory_mb.allocated.percentage | percentage | — | x |
openstack.host.vcpus_allocated.count | count | x | x |
openstack.host.vcpus_allocated.percentage | percentage | — | x |
Instances
Table 6 lists the raw metrics available for instances.
Table 6: Raw Metrics for Instances
Metric | Chart | Alarm |
---|---|---|
instance.cpu.usage | x | x |
instance.disk.io.read_bandwidth | x | x |
instance.disk.io.read_iops | x | x |
instance.disk.io.read_iosize | x | x |
instance.disk.io.read_response_time | x | x |
instance.disk.io.write_bandwidth | x | x |
instance.disk.io.write_iops | x | x |
instance.disk.io.write_iosize | x | x |
instance.disk.io.write_response_time | x | x |
instance.disk.usage.bytes | x | x |
instance.disk.usage.percentage | x | x |
instance.memory.usage | x | x |
instance.network.egress.bit_rate | x | x |
instance.network.egress.drops | x | x |
instance.network.egress.errors | x | x |
instance.network.egress.packet_rate | x | x |
instance.network.ingress.bit_rate | x | x |
instance.network.ingress.drops | x | x |
instance.network.ingress.errors | x | x |
instance.network.ingress.packet_rate | x | x |
Table 7 lists the calculated metric available for instances.
Table 7: Calculated Metrics for Instances
Metric | Chart | Alarm |
---|---|---|
instance.heartbeat | — | x |
Network Device
AppFormix can collect network device metrics using SNMP or Juniper Telemetry Interface (JTI). See Network Devices for configuration and monitoring information.
Table 8 lists the metrics available per interface with SNMP network device monitoring. See Network Device Monitoring with SNMP.
Table 8: Metrics Available per Interface with SNMP Network Device Monitoring
Metric | Unit | Chart | Alarm |
---|---|---|---|
snmp.interface.out_discards | discards/s | x | x |
snmp.interface.in_discards | discards/s | x | x |
snmp.interface.in_errors | errors/s | x | x |
snmp.interface.out_unicast_packets | packets/s | x | x |
snmp.interface.in_octets | octets/s | x | x |
snmp.interface.in_unicast_packets | packets/s | x | x |
snmp.interface.out_packet_queue_length | count | x | x |
snmp.interface.speed | bits/s | x | x |
snmp.interface.out_octets | octets/s | x | x |
snmp.interface.in_unknown_protocol | packets/s | x | x |
snmp.interface.in_non_unicast_packets | packets/s | x | x |
snmp.interface.out_errors | errors/s | x | x |
snmp.interface.out_non_unicast_packets | packets/s | x | x |
Table 9 lists the metrics available per interface with JTI network device monitoring. See also Network Device Monitoring with JTI and Custom Sensors for JTI and gRPC.
Table 9: Metrics Available per Interface with JTI Network Device Monitoring
Metric | Unit | Chart | Alarm |
---|---|---|---|
junos.system.linecard.interface.egress_errors.if_errors | errors/s | x | x |
junos.system.linecard.interface.egress_errors.if_discard | discards/s | x | x |
junos.system.linecard.interface.egress_stats.if_1sec_pkts | packets/s | x | x |
junos.system.linecard.interface.egress_stats.if_octets | octets/s | x | x |
junos.system.linecard.interface.egress_stats.if_mc_pkts | packets/s | x | x |
junos.system.linecard.interface.egress_stats.if_bc_pkts | packets/s | x | x |
junos.system.linecard.interface.egress_stats.if_1sec_octets | octets/s | x | x |
junos.system.linecard.interface.egress_stats.if_pkts | packets/s | x | x |
junos.system.linecard.interface.egress_stats.if_uc_pkts | packets/s | x | x |
junos.system.linecard.interface.egress_stats.if_pause_pkts | packets/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_fifo_errors | errors/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_frame_errors | errors/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_l3_incompletes | packets/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_runts | packets/s | x | x |
junos.system.linecard.interface.ingress_errors.if_errors | errors/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_l2chan_errors | errors/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_resource_errors | errors/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_qdrops | drops/s | x | x |
junos.system.linecard.interface.ingress_errors.if_in_l2_mismatch_timeouts | packets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_1sec_pkts | packets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_octets | octets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_mc_pkts | packets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_bc_pkts | packets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_1sec_octets | octets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_error | errors/s | x | x |
junos.system.linecard.interface.ingress_stats.if_pkts | packets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_uc_pkts | packets/s | x | x |
junos.system.linecard.interface.ingress_stats.if_pause_pkts | packets/s | x | x |
Table 10 lists the metrics available per interface queue with JTI network device monitoring.
Table 10: Metrics Available per Interface Queue with JTI Network Device Monitoring
Metric | Unit | Chart | Alarm |
---|---|---|---|
junos.system.linecard.interface.egress_queue_info.bytes | bytes/s | x | x |
junos.system.linecard.interface.egress_queue_info.packets | packets/s | x | x |
junos.system.linecard.interface.egress_queue_info.allocated_buffer_size | bytes | x | x |
junos.system.linecard.interface.egress_queue_info.avg_buffer_occupancy | bytes | x | x |
junos.system.linecard.interface.egress_queue_info.cur_buffer_occupancy | bytes | x | x |
junos.system.linecard.interface.egress_queue_info.peak_buffer_occupancy | bytes | x | x |
junos.system.linecard.interface.egress_queue_info.red_drop_bytes | bytes/s | x | x |
junos.system.linecard.interface.egress_queue_info.red_drop_packets | packets/s | x | x |
junos.system.linecard.interface.egress_queue_info.rl_drop_bytes | bytes/s | x | x |
junos.system.linecard.interface.egress_queue_info.rl_drop_packets | packets/s | x | x |
junos.system.linecard.interface.egress_queue_info.tail_drop_packets | packets/s | x | x |
Contrail Release 5.0 vRouter Plug-In
Table 11 lists metrics published by the Contrail Release 5.0 vRouter plug-in. See Contrail Monitoring to view and configure Contrail services from the GUI. See Service Monitoring to configure Contrail monitoring using Ansible.
Table 11: Metrics for Contrail Release 5.0 vRouter Plug-In
Metric | Unit | Chart | Alarm |
plugin.contrail.vrouter.v5. aged_flows | count | x | x |
plugin.contrail.vrouter.v5. total_flows | count | x | x |
plugin.contrail.vrouter.v5. exception_packets | count | x | x |
plugin.contrail.vrouter.v5. | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_flow_table_full | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vlan_fwd_enq | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vlan_fwd_tx | count | x | x |
plugin.contrail.vrouter.v5. flow_export_drops | count | x | x |
plugin.contrail.vrouter.v5. flow_export_sampling_drops | count | x | x |
plugin.contrail.vrouter.v5. flow_rate_active_flows | count | x | x |
plugin.contrail.vrouter.v5. flow_rate_deleted_flows | count | x | x |
plugin.contrail.vrouter.v5. flow_rate_added_flows | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_discard | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_pull | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_flow_no_memory | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_flow_invalid_protocol | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_flow_action_drop | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_interface_drop | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_duplicated | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_push | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_invalid_nh | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_invalid_protocol | count | x | x |
plugin.contrail.vrouter.v5. drop_stats_vhost_ds_drop_pkts | count | x | x |
OpenContrail vRouter on a Host
Table 12 lists raw metrics available for an OpenContrail vRouter on a host. See Service Monitoring to configure Contrail monitoring using Ansible.
Table 12: Raw Metrics for OpenContrail vRouter
Metric | Chart | Alarm |
---|---|---|
plugin.contrail.vrouter.aged_flows | x | x |
plugin.contrail.vrouter.total_flows | x | x |
plugin.contrail.vrouter.exception_packets | x | x |
plugin.contrail.vrouter.drop_stats_flow_queue_limit_exceeded | x | x |
plugin.contrail.vrouter.drop_stats_flow_table_full | x | x |
plugin.contrail.vrouter.drop_stats_vlan_fwd_enq | x | x |
plugin.contrail.vrouter.drop_stats_vlan_fwd_tx | x | x |
plugin.contrail.vrouter.flow_export_drops | x | x |
plugin.contrail.vrouter.flow_export_sampling_drops | x | x |
plugin.contrail.vrouter.flow_rate_active_flows | x | x |
plugin.contrail.vrouter.flow_rate_added_flows | x | x |
plugin.contrail.vrouter.flow_rate_deleted_flows | x | x |
OpenStack Project in Chart View
Table 13 lists the raw metrics available in the OpenStack Project Chart View. See AppFormix Role-Based Access to grant AppFormix permissions to read-only OpenStack users.
Table 13: Raw Metrics for OpenStack Project
Metric | Chart | Alarm |
---|---|---|
openstack.project.active_instances.count | x | x |
openstack.project.active_instances.percentage | — | x |
openstack.project.floating_ip.allocated.count | x | x |
openstack.project.floating_ip.allocated.percentage | — | x |
openstack.project.ram.allocated.count | x | x |
openstack.project.ram.allocated.percentage | — | x |
openstack.project.security_group.allocated.count | x | x |
openstack.project.security_group.allocated.percentage | — | x |
openstack.project.total_disk_usage_gb_hours.count | — | x |
openstack.project.total_hours.count | — | x |
openstack.project.total_memory_usage_mb_hours.count | — | x |
openstack.project.total_vcpu_usage_hours.count | — | x |
openstack.project.vcpus.allocated.count | — | x |
openstack.project.vcpus.allocated.percentage | — | x |
openstack.project.virtual_network.allocated.count | x | x |
openstack.project.virtual_network.allocated.percentage | — | x |
openstack.project.volume.allocated.count | x | x |
openstack.project.volume.allocated.percentage | — | x |
openstack.project.volume_gb.allocated.count | x | x |
openstack.project.volume_gb.allocated.percentage | — | x |
RabbitMQ Service
Table 14 lists the raw metrics available for RabbitMQ monitoring. See RabbitMQ Monitoring to view and configure RabbitMQ services from the GUI. See Service Monitoring to configure RabbitMQ monitoring using Ansible.
Table 14: Raw Metrics for RabbitMQ Monitoring
Metric | Unit | Chart | Alarm |
---|---|---|---|
rabbit.cluster.connection_totals.blocked_connections | count | x | x |
rabbit.cluster.connection_totals.blocked_connections_details | messages/s | x | x |
rabbit.cluster.message_stats.ack | count | x | x |
rabbit.cluster.message_stats.ack_details | messages/s | x | x |
rabbit.cluster.message_stats.deliver | count | x | x |
rabbit.cluster.message_stats.deliver_details | messages/s | x | x |
rabbit.cluster.message_stats.deliver_get | count | x | x |
rabbit.cluster.message_stats.deliver_get_details | messages/s | x | x |
rabbit.cluster.message_stats.get | count | x | x |
rabbit.cluster.message_stats.get_details | messages/s | x | x |
rabbit.cluster.message_stats.publish | count | x | x |
rabbit.cluster.message_stats.publish_details | messages/s | x | x |
rabbit.cluster.message_stats.redeliver | count | x | x |
rabbit.cluster.message_stats.redeliver_details | messages/s | x | x |
rabbit.cluster.object_totals.channels | count | x | x |
rabbit.cluster.object_totals.connections | count | x | x |
rabbit.cluster.object_totals.consumers | count | x | x |
rabbit.cluster.object_totals.exchanges | count | x | x |
rabbit.cluster.object_totals.queues | count | x | x |
rabbit.cluster.queue_totals.blocked_queues | count | x | x |
rabbit.cluster.queue_totals.blocked_queues_details | messages/s | x | x |
rabbit.cluster.queue_totals.consumer_utilisation_percent | count | x | x |
rabbit.cluster.queue_totals.messages | count | x | x |
rabbit.cluster.queue_totals.messages_details | messages/s | x | x |
rabbit.cluster.queue_totals.messages_ready | count | x | x |
rabbit.cluster.queue_totals.messages_ready_details | messages/s | x | x |
rabbit.cluster.queue_totals.messages_unacknowledged | count | x | x |
rabbit.cluster.queue_totals.messages_unacknowledged_details | messages/s | x | x |
rabbit.queue.consumers | count | — | x |
rabbit.queue.consumer_utilisation | count | — | x |
rabbit.queue.messages | count | — | x |
rabbit.queue.messages_ready | count | — | x |
rabbit.queue.messages_ready_detail | count | — | x |
rabbit.queue.memory | count | — | x |
rabbit.queue.messages_detail | count | — | x |
rabbit.queue.messages_unacknowledged | count | — | x |
rabbit.queue.messages_unacknowledged_detail | count | — | x |
rabbit.queue.state | count | — | x |
rabbit.node.sockets_total | count | x | x |
rabbit.node.fd_total | count | x | x |
rabbit.node.sockets_used_percent | count | x | x |
rabbit.node.run_queue | count | x | x |
rabbit.node.proc_used_percent | count | x | x |
rabbit.node.proc_total | count | x | x |
rabbit.node.mem_used_percent | count | x | x |
rabbit.node.uptime | count | x | x |
rabbit.node.disk_usage_ratio | count | x | x |
rabbit.node.disk_free_alarm | count | x | x |
rabbit.node.fd_used_percent | count | x | x |
rabbit.node.mem_limit | count | x | x |
rabbit.node.mem_alarm | count | x | x |
rabbit.node.disk_free | count | x | x |
rabbit.node.sockets_used | count | x | x |
rabbit.node.processors | count | x | x |
rabbit.node.running | count | x | x |
rabbit.node.disk_free_limit | count | x | x |
rabbit.node.fd_used | count | x | x |
rabbit.node.proc_used | count | x | x |
rabbit.node.mem_used | count | x | x |
rabbit.node.heartbeat | count | x | x |
rabbit.node.latency | count | x | x |
ScaleIO Service
Table 15 lists the raw metrics available for ScaleIO monitoring. See ScaleIO Monitoring for viewing and configuring ScaleIO services from the GUI. See Service Monitoring to configure ScaleIO monitoring using Ansible.
Table 15: Raw Metrics for ScaleIO Monitoring
Metric | Unit | Chart | Alarm |
---|---|---|---|
numOfDevices | count | x | x |
numOfProtectionDomains | count | x | x |
numOfSdc | count | x | x |
numOfSds | count | x | x |
numOfStoragePools | count | x | x |
numOfVtrees | count | x | x |
numOfSnapshots | count | x | x |
numOfVolumes | count | x | x |
numOfThickBaseVolumes | count | x | x |
numOfThinBaseVolumes | count | x | x |
numOfVolumesInDeletion | count | x | x |
numOfMappedToAllVolumes | count | x | x |
numOfUnmappedVolumes | count | x | x |
capacityAvailableForVolumeAllocationInKb | Kbyte | x | x |
capacityInUseInKb | Kbyte | x | x |
capacityLimitInKb | Kbyte | x | x |
unusedCapacityInKb | Kbyte | x | x |
spareCapacityInKb | Kbyte | x | x |
protectedCapacityInKb | Kbyte | x | x |
maxCapacityInKb | Kbyte | x | x |
snapCapacityInUseInKb | Kbyte | x | x |
thickCapacityInUseInKb | Kbyte | x | x |
thinCapacityInUseInKb | Kbyte | x | x |
bckRebuildReadBandwidth | Kbyte/sec | x | x |
bckRebuildWriteBandwidth | Kbyte/sec | x | x |
fwdRebuildReadBandwidth | Kbyte/sec | x | x |
fwdRebuildWriteBandwidth | Kbyte/sec | x | x |
normRebuildReadBandwidth | Kbyte/sec | x | x |
normRebuildWriteBandwidth | Kbyte/sec | x | x |
primaryReadBandwidth | Kbyte/sec | x | x |
primaryWriteBandwidth | Kbyte/sec | x | x |
rebalanceReadBandwidth | Kbyte/sec | x | x |
rebalanceWriteBandwidth | Kbyte/sec | x | x |
secondaryReadBandwidth | Kbyte/sec | x | x |
secondaryWriteBandwidth | Kbyte/sec | x | x |
totalReadBandwidth | Kbyte/sec | x | x |
totalWriteBandwidth | Kbyte/sec | x | x |
bckRebuildReadIops | IOPS | x | x |
bckRebuildWriteIops | IOPS | x | x |
fwdRebuildReadIops | IOPS | x | x |
fwdRebuildWriteIops | IOPS | x | x |
normRebuildReadIops | IOPS | x | x |
normRebuildWriteIops | IOPS | x | x |
primaryReadIops | IOPS | x | x |
primaryWriteIops | IOPS | x | x |
rebalanceReadIops | IOPS | x | x |
rebalanceWriteIops | IOPS | x | x |
secondaryReadIops | IOPS | x | x |
secondaryWriteIops | IOPS | x | x |
totalReadIops | IOPS | x | x |
totalWriteIops | IOPS | x | x |
bckRebuildReadIosize | Kbyte | x | x |
bckRebuildWriteIosize | Kbyte | x | x |
fwdRebuildReadIosize | Kbyte | x | x |
fwdRebuildWriteIosize | Kbyte | x | x |
normRebuildReadIosize | Kbyte | x | x |
normRebuildWriteIosize | Kbyte | x | x |
primaryReadIosize | Kbyte | x | x |
primaryWriteIosize | Kbyte | x | x |
rebalanceReadIosize | Kbyte | x | x |
rebalanceWriteIosize | Kbyte | x | x |
secondaryReadIosize | Kbyte | x | x |
secondaryWriteIosize | Kbyte | x | x |
totalReadIosize | Kbyte | x | x |
totalWriteIosize | Kbyte | x | x |
gRPC Sensors
Table 16 lists the available gRPC sensors. To enable these sensors, see Custom Sensors for JTI and gRPC.
These sensors are applicable only for Juniper network devices.
Table 16: gRPC Sensors
Sensor | Chart | Alarm |
---|---|---|
/junos/services/label-switched-path/usage/ | x | x |
/components/ | x | x |
/junos/system/subscriber-management/infra/sdb/statistics/ | x | x |
/junos/task-memory-information/task-memory-overall-report/task-memory-stats-list/task-memory-stats/ | x | x |
/junos/task-memory-information/task-memory-overall-report/task-size-block-list/task-size-block/ | x | x |
/lldp/interfaces/interface/state/ | x | x |
/interfaces/ | x | x |
/bgp-rib/afi-safis/afi-safi/ipv4-unicast/loc-rib/ | x | x |
/bgp-rib/afi-safis/afi-safi/ipv6-unicast/loc-rib/ | x | x |
/bgp-rib/afi-safis/afi-safi/ipv4-unicast/neighbors/ | x | x |
/bgp-rib/afi-safis/afi-safi/ipv6-unicast/neighbors/ | x | x |
/junos/system/linecard/qmon/ | x | x |
/junos/system/linecard/optics/ | x | x |
/junos/system/linecard/packet/usage/ | x | x |
/junos/system/linecard/firewall/ | x | x |
/junos/rsvp-interface-information/ | x | x |
/junos/system/linecard/npu/memory | x | x |
/junos/system/linecard/cpu/memory/ | x | x |
/lacp/ | x | x |
/network-instances/network-instance/protocols/protocol/isis/levels/level/ | x | x |
/junos/services/segment-routing/interface/ingress/usage/ | x | x |
/junos/services/segment-routing/interface/egress/usage/ | x | x |
/lldp/ | x | x |
/mpls/ | x | x |
/nd6-information/ | x | x |
/arp-information/ | x | x |
/junos/system/subscriber-management/infra/network/ppp/ | x | x |
/network-instances/network-instance/protocols/protocol/bgp/ | x | x |
/network-instances/network-instance/protocols/protocol/isis/levels/level/ | x | x |
/junos/services/segment-routing/sid/usage/ | x | x |