Nodal Management for BTI800 Series Network Elements

This section covers the following topics:

Enabling or Disabling a Port

Use this procedure to administratively enable or disable a port on a BTI800 Series network element.

1. Expand the network element in the Network tree to show the shelves in that NE.
2. Expand a shelf to show the slots in that shelf.
3. Expand a module to show the ports on that module.
4. Enable or disable a port as follows.

   1. To enable a provisioned port, right click the port and select Admin State >Enable.

   2. To disable a provisioned port, right click the port and select Admin State >Disable.