Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Marking or Unmarking a Network Element
Use this procedure to mark or unmark a network element. A marked
network element 
allows you to visually distinguish that network element
from other network elements, such as to highlight an important node
or nodes in the network, or to flag a node to other users in the system.
 | Note: Marking is implemented as a mode, which is part of the replicated data set when running with multiple servers. For more information on replicated data, see Running multiple servers with server replication. |
- To mark one or more network elements:
- Select
the network element(s) in the Network tree or in the Topology Map
view, then right-click and choose Mode >Marked.
Note: Modes are mutually exclusive. Only one mode can be selected at a time.
- Click OK in the ensuing dialog to confirm the action.
The NE(s) is now shown with a mark in the Topology Map view and in the Network tree.
- Select
the network element(s) in the Network tree or in the Topology Map
view, then right-click and choose Mode >Marked.
- To remove a mark on one or more network elements:
- Select the network element(s) in the Network tree or in the Topology Map view, then right-click and select Mode >Disable Marked.
The NE(s) is shown with the mark removed.
