Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Changing the proNX Service Manager Dashboard Settings

    Use this procedure to change alarm and display settings.

    1. Bring up the Settings menu by selecting Settings in the administration drop-down menu (top right corner).

      For example:

      The Settings window appears.

    2. To change the alarms settings, click on Alarms.
      1. To show or hide acknowledged alarms, set Show if acknowledged to ON or OFF respectively.

        Note: If you change this setting while the Alarms table is being displayed, you will need to reload the Alarms table page for the change to take effect.

      2. To set the time delay before removing cleared alarms from view, specify the Display duration when cleared in seconds.
      3. To specify how often graphs are refreshed, enter the Graph refresh interval in minutes.
      4. To turn on or off audio alerts for alarms, set Beep when raised to ON or OFF respectively.
      5. To show alarm pop-ups in the proNX Service Manager Dashboard summary view, set Pop-up when raised on main dashboard to ON.
      6. To show alarm pop-ups in all other views, set Pop-up when raised on all other views to ON.
    3. To change the display settings, click Display.
      1. Specify the Percent port utilization threshold for highlighting.

        This is the threshold at which a port is highlighted in the Port Utilization table.

    Modified: 2016-12-11