Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Enabling and Disabling Modules

 

Use this procedure to administratively enable or disable modules.

Most modules can be administratively enabled or disabled. Modules should be administratively disabled prior to removal.

This procedure applies to all modules.

  1. Enter configuration mode.
    bti7800# config
  2. Enter configuration mode for the module you want to enable or disable.

    For example, to enter configuration mode for the ROADM module in chassis 1 slot 8:

    bti7800(config)# equipment chassis:1 module roadm:1/8
  3. Enable or disable the module.
    1. To enable the module:

      For example:

      bti7800(config-module-roadm:1/8)# admin-status up
    2. To disable the module:

      For example:

      bti7800(config-module-roadm:1/8)# admin-status down
  4. Apply the provisioning.
    bti7800(config-module-roadm:1/8)# commit