Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Supported YANG Modules

 

The BTI7800 YANG modules can be downloaded from https://www.juniper.net/support/downloads by selecting the desired product and release.

The following table lists the BTI7800-specific YANG modules and indicates whether they can be used by third-party NETCONF clients. Only those modules labeled as "usable" can be used by customers running third-party clients. All other modules are for internal use or for the use of the proNX Service Manager.

Module

Description

Supported for third-party NETCONF clients

Introduced in Release

atlas-aaa.yang

The module defining user profile parameters.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-amp.yang

The submodule defining 96-Channel Amplifier (AMP1) modules.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-circuits.yang

The submodule defining transport cross-connects.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-conditions.yang

The module defining BTI7800 alarms and conditions.

Usable for fault management.

Before 2.1.1

atlas-debug.yang

The submodule defining debug data.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-dol-common.yang

atlas-dol-hidden.yang

atlas-dol.yang

Modules and submodules defining ROADM objects and parameters.

Not for use by third-party NETCONF clients.

2.1.1

atlas-equipment.yang

The submodule defining equipment objects.

Usable for inventory management.

Before 2.1.1

atlas-eth-if.yang

The submodule defining Ethernet interfaces.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-if-protection.yang

The submodule defining interface protection.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-interfaces.yang

The module defining interfaces.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-internal.yang

The module defining internal objects.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-lldp.yang

The submodule defining the information contained in LLDP TLVs (used for LLDP snooping).

Not for use by third-party NETCONF clients.

4.1

atlas-logging.yang

The submodule defining logging.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-mgmt-interface.yang

atlas-mgt-comn.yang

atlas-mgt-static.yang

atlas-mgt-vrf.yang

atlas-mgt.yang

Modules and submodules defining management and management networking objects and parameters.

Not for use by third-party NETCONF clients.

2.1.1

atlas-notif.yang

The submodule defining notifications.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-och-if.yang

The submodule defining OCH interfaces on the UFM6.

Not for use by third-party NETCONF clients.

4.1

atlas-otn-if.yang

The submodule defining OTU and ODU interfaces.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-phy-if.yang

The submodule defining physical layer attributes common to all interfaces.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-products.yang

The module defining BTI7800 orderable products.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-snmp.yang

The module defining SNMP objects and parameters and inventory.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-sonet-if.yang

The submodule defining SONET and SDH interfaces.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-statistics.yang

The submodule defining PMs and statistics.

Usable for performance management. Not for historical PM use.

Before 2.1.1

atlas-systemDateTime.yang

The module defining system date and time.

Required by atlas-system.yang.

Before 2.1.1

atlas-system.yang

The submodule defining system-level attributes.

Usable for network element discovery. Requires atlas-systemDateTime.yang.

Before 2.1.1

atlas-types.yang

The module defining common parameter types used in other modules and submodules.

Required by most modules and submodules. Should be included for all use cases.

Before 2.1.1

atlas-user.yang

The submodule defining user management and authentication.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas-virtual-if.yang

The submodule defining virtual interfaces.

Not for use by third-party NETCONF clients.

2.1.1

atlas-wavelength-protection.yang

The submodule defining WPS protection groups.

Not for use by third-party NETCONF clients.

Before 2.1.1

atlas.yang

A top-level module containing various submodules.

Not for use by third-party NETCONF clients.

Before 2.1.1

Note

In addition to the BTI7800 YANG modules, the BTI7800 YANG implementation depends on a number of standard YANG modules. These are also supplied by Juniper Networks.