Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


statistics threshold profile




This command creates a threshold profile that you can apply to different entities (usually interfaces). A threshold profile contains the threshold crossing alert levels for specified alarms.


profile name the name of the profile

Values: The profile name cannot begin with “def-”. All profiles that begin with “def-” are default profiles and cannot be created or changed by the user.

entityType type the type of interface to which this profile applies

Values: osc

statistic statistic-name the statistic that you are setting the thresholds for

Values: opt-back-ref-ratio

threshold-type the type of threshold

Values: alarmHigh

binLength the bin length

Values: unTimed

dec64ClearValue value the alarm clear threshold
dec64RaiseValue value the alarm set threshold
disabled disables this profile
enabled enables this profile

Additional Information

This command allows you to create profiles for many different entities with many different options but only the entities and options listed above are supported. Note that this command only creates and configures the profile. You still need to apply this profile to an interface for the profile to take effect for that interface.

Required Privilege Level

Related Documentation

Sample Output

The following example configures and enables a profile that sets the opt-back-ref-ratio high alarm set and clear thresholds to -21 dB and -22 dB, respectively.