Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show equipment module

 

Syntax

Description

This command displays provisioned modules and provisioned equipment that the modules contain (at varying levels of specificity).

Options

Parameter

Description

Range

Default

chassis_id

Restricts displayed equipment to the specified chassis.

Note: The information displayed for the same equipment differs slightly depending on whether the chassis is or is not specified. See examples below.

A valid chassis identifier (for example, chassis:1)

If no chassis is specified, the displayed equipment can be from any chassis.

module [module_id]

Restricts displayed equipment to the specified module.

A valid module identifier (for example, ufm:1/3)

If no module is specified, the displayed equipment can be from any module.

bic [bic_id]

Restricts displayed equipment to the specified BIC.

This option is only available if the containing module is a UFM.

A valid BIC identifier (for example, bic:1/3/1) for the specified module

If no BIC is specified, the displayed equipment can be from any BIC.

transceiver [transceiver_id]

Restricts displayed equipment to the specified transceiver.

This option is only available if the containing module is a UFM.

A valid transceiver identifier (for example, cfp:1/3/2/1) for the specified BIC or UFM

If no transceiver is specified, the displayed equipment can be from any transceiver.

operational-status [status]

Restricts displayed equipment to the specified operational status.

The following are the valid status values:

  • dormant

  • down

  • lowerLayerDown

  • notPresent

  • testing

  • unknown

  • up

If no status is specified, the displayed equipment can contain any operational status.

Additional Information

The operational state or status can take on the following values:

  • up - The specified equipment is present, administratively enabled, and functioning normally.

  • down - The specified equipment is either administratively disabled, mismatched, or alarmed with a fault that makes it unable to provide its provisioned function.

  • notPresent - The equipment is not present in the location for which it is provisioned.

  • lowerLayerDown - Supporting equipment is reporting an operational state of down.

  • unknown - The operational state of the specified equipment cannot be determined, possibly because it is rebooting.

Required Privilege Level

Related Documentation

Sample Output

To display all modules:

bti7800# show equipment module

To display all transceivers on a specific BIC:

bti7800# show equipment chassis:1 module ufm:1/3 bic bic:1/3/1 transceiver