Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

protection wavelength group

 

Syntax

Description

This command sets parameters for the specified wavelength protection group (wpsgroup) on the WPS4. If the wavelength protection group does not exist, the wavelength protection group is created.

Note

Creating the wavelength protection group will automatically create the client and line ports associated with the group.

Options

Parameter

Description

Range

Default Value

wpsgroup:location_id

Protection wavelength group identifier

See Location Identifiers.

None

protid string

A user-defined identifier of the protection group

0 to 32 alphanumeric characters

An empty string

protid-remote string

A user-defined identifier of the remote protection group

0 to 32 alphanumeric characters

An empty string

custom string

User-defined string

0 to 255 alphanumeric characters

An empty string

revertive-type type

Determines whether traffic will revert to the working line following a protection switch when the defect on the line clears. Applies to automatic, manual, forced and lockout switches.

revertive

non-revertive

non-revertive

working wpsport:location_id

The line port designated as the working port.

This parameter is automatically assigned by the system.

If specified, the port must be line port A associated with the group.

See Location Identifiers.

Port A is the working port associated with the wavelength protection group.

protecting wpsport:location_id

The line port designated as the protecting port.

This parameter is automatically assigned by the system

If specified, the port must be line port B associated with the group.

See Location Identifiers.

Port B is the protecting port associated with the wavelength protection group.

revertive-time time

The time, in seconds, that must pass before activity reverts to the working line after the conditions causing the protection switch have cleared.

Applies only if the group is in revertive mode.

This parameter is not configurable.

600

600

Required Privilege Level

Sample Output

bti7800(config)# protection wavelength group wpsgroup:1/3/1