Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show tech-support

 

Syntax

Description

Use this command to collect system data for Juniper Networks Support.

Options

Parameter

Description

Range

Default Value

datapath module module_id

Collects information for the datapath associated with the specified module or chassis.

This information is useful in debugging current datapath (for example, cross-connect) issues.

A valid module or chassis identifier (for example, ufm:1/3)

None

remote-url protocol:url

The destination to send the collected information for analysis

sftp|ftp://
[username@]host
[:port]/[filepath]

username is the username to use on the remote server.

host is the host name or IP address of the remote server.

port is the protocol port number to use.

filepath is the filepath on the remote server.

If username is not specified, the current CLI session’s login name is used.

If port is not specified, the standard default FTP or SFTP port is used.

If filepath is not specified, the file is copied to the FTP/SFTP user’s home directory.

password

The password associated with the specified username

If a password is not specified, the system prompts you for a password.

Note: The password must contain alphanumeric characters only.

A character string

None

Required Privilege Level

Sample Output

bti7800# show tech-support remote-url sftp://user@10.1.1.1