Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

conditions

 

Syntax

Description

This command configures the reporting of faults.

Options

Parameter

Description

Range

Default Value

condition_type

The condition type or fault

See Alarms and Conditions.

None

disable

Disables the specified fault.

When a fault is disabled, the fault is not alarmed and does not appear in the output of the show alarms or show conditions command.

By default, all faults are enabled.

severity

The severity of the fault

critical: A fault that is likely causing serious loss or interruption of traffic.

major: A fault that can potentially lead to loss or interruption of traffic.

minor: A fault that does not significantly affect traffic.

not-alarmed: A fault that results in a standing condition, not an alarm. The fault does not appear in the output of the show alarms command.

not-reported: A fault's severity is set to not-reported when it is being masked by another alarm. An alarm might be masked if it does not best isolate the fault causing the failure. The fault does not appear in the output of the show alarms command. This severity is assigned automatically, and is typically not set by the user.

See Alarms and Conditions.

Required Privilege Level

Related Documentation

  • None

Sample Output

bti7800(config)# conditions settings eqptMism severity major