Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

ScmNoNmConn

 

Table 1: Alarm Details

Parameter

Description

Code

scmNoNmConn

Description/Cause

No Network Management Connectivity on System Controller Module (SCM):

  • In a dual-CMM system, neither SCM can connect to the management IP network.

  • In a single-CMM system, the SCM cannot connect to the management IP network.

Entities Affected

Management modules (see respective table below).

Default Severity

Critical

Service Affecting

Yes (true).

Alarm Clearing

See Clearing an scmNoNmConn alarm.

Related Fault Hierarchy

Table 2: Management Modules

Entity Name

 

Fault Indicator

Module

Indicator

Status

cmm:<chassis>/<slot>

CMM

See BTI7800 Series Module and BIC LED Behavior.

Clearing an ScmNoNmConn Alarm

Note

Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

  1. Ensure that the connections between the management interface and the gateway on the active and standby CMMs is intact.
  2. Check for alarms on the CMM.
    • If the alarm clears, you have completed this procedure.

    • If the alarm does not clear, contact your next level of support.