Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

OptHighTh

 

Table 1: Alarm Details

Parameter

Description

Code

optHighTh

Description

Optical Power Transmitted Above High Threshold: The optical power transmitted is above the high threshold.

Entities Affected

  • Optical channel interfaces (see respective table below).

  • OTN OTU interfaces (see respective table below).

  • Ethernet interfaces (see respective table below).

  • SONET/SDH interfaces (see respective table below).

  • Wavelength channels (see respective table below).

Possible Cause

The optical transmitter is faulty.

Default Severity

Major

Service Affecting

No (false).

Alarm Clearing

See Clearing an OptHighTh alarm.

Related Fault Hierarchy

See Common fault hierarchy - OTN and CBR ports.

Table 2: Optical Channel Interfaces

Entity Name

 

Fault Indicator

Module

Indicator

Status

och:<chassis>/<slot>/<2>/<1>/<subport.och>

UFM6

Fault LED, 200G line port

On

Table 3: OTN OTU Interfaces

Entity Name

 

Fault Indicator

Module

Indicator

Status

otu4:<chassis>/<slot>/<1>/<1>

UFM4

Fault LED, 100G line port

On

otu4:<chassis>/<slot>/<subslot>/<port>

1x CFP BIC

Fault LED, 100G port

otu2:<chassis>/<slot>/<subslot>/<port>

12x SFP+ BIC

Fault LED, 10G port

otu2e:<chassis>/<slot>/<subslot>/<port>

Note: Supported on UFM3 only.

Table 4: Ethernet Interfaces

Entity Name

 

Fault Indicator

Module

Indicator

Status

100ge:<chassis>/<slot>/<subslot>/<port>/<subport>

1x CFP BIC

Fault LED, 100G port

On

100ge:<chassis>/<slot>/<1>/<port>

UFM6

Fault LED, 10/40/100G port

40ge:<chassis>/<slot>/<1>/<port>

UFM6

Fault LED, 10/40/100G port

10ge:<chassis>/<slot>/<1>/<port>/<subport>

UFM6

Fault LED, 10/40/100G port

10ge:<chassis>/<slot>/<subslot>/<port>/<subport>

12x SFP+ BIC

Fault LED, 10G port

Table 5: SONET/SDH Interfaces

Entity Name

 

Fault Indicator

Module

Indicator

Status

oc192:<chassis>/<slot>/<subslot>/<port>

12x SFP+ BIC

Fault LED, 10G port

On

wanoc192:<chassis>/<slot>/<subslot>/<port>

stm64:<chassis>/<slot>/<subslot>/<port>

wanstm64:<chassis>/<slot>/<subslot>/<port>

Table 6: Wavelength Channels

Entity Name

 

Fault Indicator

Module

Indicator

Status

channel:<chassis>/<slot>/<subslot>/<port.channel>

1x CFP BIC1

Fault LED, 100G port

On

1 Reporting of this alarm for a wavelength channel is supported only on multiwavelength CFP transceivers.

Clearing an OptHighTh Alarm

Note

Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

Note

Refer to the BTI7800 Series Hardware Overview and Installation Guide before replacing equipment.

  1. Retrieve detailed information for the interface to determine whether the value of the Optical Power Tx counter is within the range indicated by the Optical Power Transmitted Minimum Threshold and Optical Power Transmitted Maximum Threshold values.
    show interface name:identifier detail
  2. Replace either the pluggable transceiver installed in the port or, if the alarm is raised against an interface provisioned on an integrated MSA, the UFM.
  3. Check for alarms on the interface.

    • If the alarm clears, you have completed this procedure.

    • If the alarm does not clear, contact your next level of support.