Table 1: Alarm/condition Details
One Multi-Chassis Cable Disconnected: A cable that connects two CMMs in a multi-chassis configuration is not connected to a CMM.
Equipment (see respective table below).
Note: This alarm is supported on the BTI7814 and BTI7802 chassis only.
Related Fault Hierarchy
Table 2: Equipment
chassis:<1 | 2>
BTI7814 or BTI7802
See equipment specifications in the BTI7800 Series Hardware Overview and Installation Guide.
Clearing a OneCableDisconnected Alarm
Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.
- Inspect the cable connecting the CMMs, and ensure that it is intact and correctly connected.
- Check for alarms on the chassis.
If the alarm has cleared, you have completed this procedure.
If the alarm does not clear, contact your next level of support.