Table 1: Alarm Details
Controllers are in Different Chassis: The active CMMs in a multi-chassis configuration are not located in the same chassis.
Equipment (see respective table below).
Note: This alarm is supported on the BTI7814 and BTI7802 chassis only.
Related Fault Hierarchy
Table 2: Equipment
chassis:<1 | 2>
BTI7814 or BTI7802
See equipment specifications in the BTI7800 Series Hardware Overview and Installation Guide.
Clearing a NonCoLocatedController Alarm
Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.
- Retrieve information for the hub and satellite chassis:
show system chassis
- Ensure that multi-chassis system is correctly configured. For information, see the BTI7800 Series Software Configuration Guide.
- Check for alarms on the chassis.
If the alarm has cleared, you have completed this procedure.
If the alarm does not clear, contact your next level of support.