Table 1: Alarm Details
Equipment Degrade: Initialization of a module has failed.
Traffic modules (see respective table below).
Related Fault Hierarchy
Table 2: Traffic Modules
1x CFP BIC or 12x SFP+ BIC
Clearing an EqptDgrd Alarm
Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.
Refer to the BTI7800 Series Software Configuration Guide before either rebooting or changing the administrative status of equipment.
- Do the following:
For a UFM module, perform a cold reboot of the module.
For a BIC module, administratively disable the module, and then administratively enable it.
- Check for alarms on the module.
If the alarm has cleared, you have completed this procedure.
If the alarm does not clear, contact your next level of support.