Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

BTI7800 Series Module and BIC LED Behavior

 

Table 1: CMM LEDs

LEDs

Color

Description

Identify

Amber

Not used.

Active

Green

The CMM is operationally up.

Fail

Red

The CMM is operationally down or the CMM is not recognized.

Hot Swap

Blue

The CMM does not match the provisioned CMM.

Link (right)

Green

The link is up.

Activity (left)

Green

The LED flickers to indicate activity on the link.

Table 2: Service Module LED Behavior

Name

Description

State

State Description

Identify

(AMBER)

The Identify LED indicates whether the CMM has identified and acknowledged the newly-inserted module.

OFF

The CMM has identified and acknowledged the module.

The CMM can only acknowledge the module if the module is administratively up. A newly-inserted module is administratively up if either of the following is true:

  • The module has been pre-provisioned and configured to be administratively up.

  • Auto-provisioning is enabled. If auto-provisioning is enabled and if the CMM is able to identify the module, the module is automatically provisioned and its administrative status is set to up.

ON

The CMM has failed to identify or acknowledge the module.

BLINKING

The CMM is attempting to identify and acknowledge the module.

Active

(GREEN)

The Active LED reflects the operational status of the module.

OFF

The operational status of the module is down.

ON

The operational status of the module is up.

Fail

(RED)

The Fail LED reflects the operational status of the module.

OFF

The operational status of the module is up.

ON

The operational status of the module is down.

H/S

(BLUE)

The Hot Swap H/S LED indicates whether the module can be removed from the chassis.

OFF

The administrative status of the module is up, and the actual module matches the provisioned module.

The module should not be removed from the chassis in this state.

ON

The administrative status of the module is down, or the actual module does not match the provisioned module.

The module can be removed from the chassis in this state.

BLINKING

This is a transient state that occurs when plugging in a module, or when changing its administrative status.

The module should not be removed from the chassis in this state.

Table 3: BIC LEDs

LEDs

Color

Description

Active

Green

The module is operating normally.

Fail

Red

The module has failed.

H/S (Hot Swap)

Blue

ON: The module is in a quiescent state, and can be removed from the slot after a minimum of 5 seconds in this state.

BLINKING: The module is being placed into a quiescent state. It cannot be removed from the slot.

OFF: The module is operating normally. It cannot be removed from the slot.

Table 4: Port LEDs (UFMs and BICs)

LEDs

Color

Description

Fail

Red

The port has failed.

Fault

Amber

A fault exists on the port.