Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Supported MIBs

 

You can download supported MIBs from https://www.juniper.net/support/downloads by selecting the desired product and release.

Note

The BTI7800 does not allow create access to any of the supported objects even if the supported object has a MAX-ACCESS value of read-create.

Table 1 lists the objects supported from the standard MIBs.

Table 1: Standard MIBs

MIBs

RFC

Supported Objects (OID)

SYSTEM MIB

RFC3418

The following objects from the System Group are supported:

  • sysDescr (1.3.6.1.2.1.1.1)

  • sysObjectID (1.3.6.1.2.1.1.2)

  • sysContact (1.3.6.1.2.1.1.4)

  • sysName (1.3.6.1.2.1.1.5)

  • sysLocation (1.3.6.1.2.1.1.6)

  • sysServices (1.3.6.1.2.1.1.7)

  • sysORLastChange (1.3.6.1.2.1.1.8)

IF-MIB

RFC2863

The following objects from the Interfaces Group are supported.

  • ifTable (1.3.6.1.2.1.2.2)

    • ifEntry (1.3.6.1.2.1.2.2.1)

      • ifIndex (1.3.6.1.2.1.2.2.1.1)

      • ifDescr (1.3.6.1.2.1.2.2.1.2)

      • ifType (1.3.6.1.2.1.2.2.1.3)

      • ifMtu (1.3.6.1.2.1.2.2.1.4)

      • ifAdminStatus (1.3.6.1.2.1.2.2.1.7)

      • ifOperStatus (1.3.6.1.2.1.2.2.1.8)

  • ifXTable (1.3.6.1.2.1.31.1.1)

    • ifXEntry (1.3.6.1.2.1.31.1.1.1)

      • ifName (1.3.6.1.2.1.31.1.1.1.1)

      • ifLinkUpDownTrapEnable (1.3.6.1.2.1.31.1.1.1.14)

      • ifAlias (1.3.6.1.2.1.31.1.1.1.18)

  • snmpTraps (1.3.6.1.6.3.1.1.5)

    • linkDown (1.3.6.1.6.3.1.1.5.3)

    • linkUp (1.3.6.1.6.3.1.1.5.4)

Note: This MIB is supported for UFM interfaces and for virtual mgt interfaces.

IP-MIB (supported in releases 2.1.1 and higher)

RFC4293

The following objects from the IPv4 address table are supported:

  • ipAddrTable (1.3.6.1.2.1.4.20)

    • ipAddrEntry (1.3.6.1.2.1.4.20.1)

      • ipAdEntAddr (1.3.6.1.2.1.4.20.1.1)

      • ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2) - The index is assigned as follows:

        • shared management IP: 5

        • CMM:1/A eth1 interface: 4101

        • CMM:1/B eth1 interface: 8197

      • ipAdEntNetMask (1.3.6.1.2.1.4.20.1.3)

Note: This MIB is supported for the shared management IP interface and for the management Ethernet ports (eth1) on both CMMs.

RMON-MIB (supported in releases 2.1.1 and higher)

RFC2819

The following objects from the Ethernet statistics group are supported:

  • statistics (1.3.6.1.2.1.16.1)

    • etherStatsTable (1.3.6.1.2.1.16.1.1)

      • etherStatsEntry (1.3.6.1.2.1.16.1.1.1)

        • etherStatsIndex (1.3.6.1.2.1.16.1.1.1.1)

        • etherStatsDataSource (1.3.6.1.2.1.16.1.1.1.2)

        • etherStatsDropEvents (1.3.6.1.2.1.16.1.1.1.3)

        • etherStatsOctets (1.3.6.1.2.1.16.1.1.1.4)

        • etherStatsPkts (1.3.6.1.2.1.16.1.1.1.5)

        • etherStatsBroadcastPkts (1.3.6.1.2.1.16.1.1.1.6)

        • etherStatsMulticastPkts (1.3.6.1.2.1.16.1.1.1.7)

        • etherStatsCRCAlignErrors (1.3.6.1.2.1.16.1.1.1.8) - This counter considers packets up to a maximum of 9600 octets but otherwise conforms with the standard definition in the RMON MIB.

        • etherStatsUndersizePkts (1.3.6.1.2.1.16.1.1.1.9)

        • etherStatsOversizePkts (1.3.6.1.2.1.16.1.1.1.10) - This counter only considers packets whose length exceeds 9600 octets but otherwise conforms with the standard definition in the RMON MIB.

        • etherStatsFragments (1.3.6.1.2.1.16.1.1.1.11)

        • etherStatsJabbers (1.3.6.1.2.1.16.1.1.1.12) - This counter only considers packets whose length exceeds 9600 octets but otherwise conforms with the standard definition in the RMON MIB.

        • etherStatsCollisions (1.3.6.1.2.1.16.1.1.1.13)

        • etherStatsPkts64Octets (1.3.6.1.2.1.16.1.1.1.14)

        • etherStatsPkts65to127Octets (1.3.6.1.2.1.16.1.1.1.15)

        • etherStatsPkts128to255Octets (1.3.6.1.2.1.16.1.1.1.16)

        • etherStatsPkts256to511Octets (1.3.6.1.2.1.16.1.1.1.17)

        • etherStatsPkts512to1023Octets (1.3.6.1.2.1.16.1.1.1.18)

        • etherStatsPkts1024to1518Octets (1.3.6.1.2.1.16.1.1.1.19)

        • etherStatsOwner (1.3.6.1.2.1.16.1.1.1.20)

        • etherStatsStatus (1.3.6.1.2.1.16.1.1.1.21)

Note: This MIB is supported for UFM ethernetCsmacd interfaces only.

In addition to the objects supported in standard MIBs, the BTI7800 supports a set of enterprise MIBs (Table 2) that can be used to retrieve system inventory, provision equipment and facilities, and monitor faults through trap-based alarm notification and retrieval of active alarms and conditions.

Table 2: BTI7800 MIBs

MIBs

Description

BTI-MIB

Top-level BTI Series MIB.

BTI7800-MIB

Top-level BTI7800 MIB.

BTI7800-NOTIFICATIONS-MIB

Contains trap information for each alarm and condition.

BTI7800-CONDITIONS-MIB

Contains objects relating to the retrieval of active alarms and conditions.

BTI7800-EQUIPMENT-MIB

Contains objects relating to the system equipment.

BTI7800-INVENTORY-MIB

Contains objects relating to the system inventory.

BTI7800 enterprise MIBs have the following hierarchy within the enterprise (1.3.6.1.4.1) branch:

  • btiSystems (1.3.6.1.4.1.18070)

    • btiProducts (1.3.6.1.4.1.18070.2)

      • bti7800 (1.3.6.1.4.1.18070.2.9)

        • BTI7800-CONDITIONS-MIB (1.3.6.1.4.1.18070.2.9.1)

        • BTI7800-NOTIFICATIONS-MIB (1.3.6.1.4.1.18070.2.9.2)

        • BTI7800-MIB (1.3.6.1.4.1.18070.2.9.3)

          • BTI7800-EQUIPMENT-MIB (1.3.6.1.4.1.18070.2.9.3.1)

          • BTI7800-INVENTORY-MIB (1.3.6.1.4.1.18070.2.9.3.2)

Load Order

You must only load MIB files that are associated with the software load running on the BTI7800 system. Always unload all previous versions of MIB files before installing new versions.

Note

The MIBs must be loaded in the order listed:

  • BTI7800-NOTIFICATIONS-MIB

  • BTI7800-CONDITIONS-MIB

  • BTI7800-EQUIPMENT-MIB

  • BTI7800-INVENTORY-MIB

Release History Table
Release
Description
IP-MIB
RMON-MIB