Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

system snmp notify-target

 

Syntax

Description

This command sets the IP address and port of the SNMP trap receiver.

Note

This command provides the same function as the snmp-server host command.

Options

Parameter

Description

Range

Default Value

ip_address

The destination IP address of the host receiving trap notifications

A valid IP address in dotted decimal format (for example,10.1.1.1).

udp-port number

The UDP port to use

0 to 65,535

162

Additional Information

To create a list of trap receivers, repeat this command for each trap receiver. Each trap receiver must have a different IP address. The list cannot contain more than one trap receiver with the same IP address.

Required Privilege Level

Related Documentation

Sample Output

bti7800(config)# system snmp notify-target 10.1.1.1