Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

system auto-warm-boot

 

Syntax

Description

This command determines whether the system automatically reboots an unresponsive module or not.

Options

Parameter

Description

Default

ALL

Disables auto-warm-boot for all modules (that is, for all service modules and for the standby CMM)

By default, auto-warm-boot is enabled for all modules.

CMM

Disables auto-warm-boot for the standby CMM

By default, auto-warm-boot is enabled for all modules.

PLD

Disables auto-warm-boot for all service modules

By default, auto-warm-boot is enabled for all modules.

Additional Information

When auto-warm-boot is enabled, the active CMM automatically warm reloads a service module and/or a standby CMM up to 3 times if the service module and/or standby CMM is unresponsive.

Warm reloading modules is not service affecting as transport and optical traffic continue to be passed in a warm reload, but software-based features on the service module (such as PM collection, APSD, APR, FSPD) are disabled while a service module reloads.

Required Privilege Level

Related Documentation

  • None

Sample Output

To disable auto-warm-boot for the service modules:

bti7800(config)# system auto-warm-boot disabled PLD

To enable auto-warm-boot for all modules:

bti7800(config)# no system auto-warm-boot disabled