Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?






This command enables the CLI to prompt you for mandatory parameters during configuration.

By default, autowizard is set to true, which means that the CLI prompts you for mandatory parameters if you neglect to specify them.

If you disable autowizard, the CLI does not prompt you for mandatory parameters. If you neglect to configure the mandatory parameters, the commit command fails.


If you intend to use the running-config output as input to the CLI, you should disable autowizard (set to false).


Required Privilege Level

Related Documentation

  • None

Sample Output

Here is an example where autowizard is set to true. The CLI prompts for the mandatory type parameter.

bti7800# autowizard true

Here is an example where autowizard is set to false. The commit fails because the mandatory type parameter is not configured.

bti7800# autowizard false