Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

amp wdm

 

Syntax

Description

This command configures and monitors WDM (Wavelength Division Multiplexing) on equipment modules assigned to optical layer groupings.

Options

Parameter

Description

Range

Default Value

admin-status

The administrative status of the WDM object

down

up

up

amp-tilt-trim

The tilt control parameters

A decimal number, in the format: x.x

0.0

custom1, 2, 3

User-defined information about the WDM object

fiber-type

The fiber type that connects to the amplifier

Note: Once configured, the system automatically compensates for the tilt.

eleaf

ssmf

twcl

twrs

ssmf

ol-id

The user-defined identifier for the optical layer equipment

1 to 32 characters

post-amp-gain

The post-amp gain control in dB

A decimal number, in the format: x.x

4.0

span-loss-rxhighth

The span loss threshold in dB

A decimal number, in the format: x.x

  • If the OSC optical power received is ≤ -7 dBm, do not fit a pad.

  • If the OSC optical power received is between -2 and -7 dBm, fit a 5-dB pad to the Line port.

  • If the OSC optical power received is > -2 dBm, fit a 10-dB pad to the Line port.

0.0

Required Privilege Level

Sample Output

bti7800(config)# amp wdm wdm:1/6/1/1