Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

RF

 

Table 1: Condition Details

Parameter

Description

Code

rf

Description/Cause

Remote Fault: The local interface has received a remote-fault signal from the NE at the far end of the fiber, indicating that no Ethernet signal is being transmitted downstream of (and away from) the local NE. (See also Maintenance Signaling.)

Entities Affected

Ethernet interfaces (see respective table below).

Default Severity

Not alarmed.

Service Affecting

No (false).

Condition Clearing

See Clearing an RF condition.

Related Fault Hierarchy

See Ethernet interface fault hierarchy.

Table 2: Ethernet Interfaces

Entity Name

 

Fault Indicator

Module

Indicator

Status

100ge:<chassis>/<slot>/<subslot>/<port>/<subport>

1x CFP BIC

100ge:<chassis>/<slot>/<1>/<port>

UFM6

40ge:<chassis>/<slot>/<1>/<port>

UFM6

10ge:<chassis>/<slot>/<1>/<port>/<subport>

UFM6

10ge:<chassis>/<slot>/<subslot>/<port>/<subport>

12x SFP+ BIC

Clearing an RF Condition

Note

Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

  1. Check for and clear all alarms downstream of the local NE.
  2. Check for conditions on the local interface.
    • If the condition clears, you have completed this procedure.

    • If the condition does not clear, contact your next level of support.