Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

EqptMiss

 

Table 1: Alarm Details

Parameter

Description

Code

eqptMiss

Description/Cause

Equipment Missing: Provisioned equipment is not physically present in a slot or subslot.

Entities Affected

  • Equipment (see respective table below).

  • Management and traffic modules (see respective table below).

  • Pluggable transceivers (see respective table below).

Default Severity

Critical

Service Affecting

Yes (true).

Alarm clearing

See Clearing an EqptMiss alarm.

Related Fault Hierarchy

See Equipment fault hierarchy.

Table 2: Equipment

Entity Name

 

Fault Indicator

Equipment

Indicator

Status

fan:<chassis>/<slot>

Cooling module

esl:<chassis>/<slot>

ESL

pem:<chassis>/<slot>

PEM

Table 3: Management and Traffic Modules

Entity Name

 

Fault Indicator

Module

Indicator

Status

cmm:<chassis>/<slot>

CMM

ufm:<chassis>/<slot>

UFM

bic:<chassis>/<slot>/<subslot>

BIC

roadm:<chassis>/<slot>

ROADM2

ila:<chassis>/<slot>

ILA

amp:<chassis>/<slot>

AMP1

wps:<chassis>/<slot>

WPS4

Table 4: Pluggable Transceivers

Entity Name

 

Fault Indicator

Transceiver

Indicator

Status

<transceiver-type>:<chassis>/<slot>/<subslot>/<port>

where transceiver-type corresponds to the type of transceiver installed in the port; for example, cfp, qsfp, qsfp28, or sfpPlus.

CFP, QSFP+, QSFP28, SFP+

pre:<chassis>/<slot>

PRE

Clearing an EqptMiss Alarm

Note

Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

Note

Refer to the BTI7800 Series Hardware Overview and Installation Guide before installing equipment.

  1. Retrieve inventory and provisioned-equipment information:
    show inventory
    show equipment
  2. Confirm whether the equipment (equipment, traffic module, or pluggable transceiver) is present in the slot or subslot.
    • If the equipment is present in the slot or subslot, go to 3.

    • If the equipment is not present in the slot or subslot, go to 4.

  3. Ensure that the equipment is properly seated in the slot or subslot, and then go to 5.
  4. Install the missing equipment, ensuring that its attributes match the attributes of the equipment provisioned for the slot or subslot. For information, see the BTI7800 Hardware Overview and Installation Guide.
  5. Check for alarms on the equipment.
    • If the alarm has cleared, you have completed this procedure.

    • If the alarm does not clear, contact your next level of support.