Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

EqptMism

 

Table 1: Alarm Details

Parameter

Description

Code

eqptMism

Description/Cause

Equipment Mismatch: The installed equipment does not match the equipment provisioned for the slot or subslot.

Entities Affected

  • Equipment (see respective table below).

  • Traffic modules (see respective table below).

  • Pluggable transceivers (see respective table below).

Default Severity

Critical

Service Affecting

Yes (true).

Alarm Clearing

See Clearing an EqptMism alarm.

Related Fault Hierarchy

See Equipment fault hierarchy.

Table 2: Equipment

Entity Name

 

Fault Indicator

Equipment

Indicator

Status

fan:<chassis>/<slot>

Cooling module

See equipment specifications in the BTI7800 Series Hardware Overview and Installation Guide.

esl:<chassis>/<slot>

ESL

pem:<chassis>/<slot>

PEM

Table 3: Traffic Modules

Entity Name

 

Fault Indicator

Module

Indicator

Status

ufm:<chassis>/<slot>

UFM

See BTI7800 Series Module and BIC LED Behavior.

bic:<chassis>/<slot>/<subslot>

BIC

roadm:<chassis>/<slot>

ROADM2

ila:<chassis>/<slot>

ILA

amp:<chassis>/<slot>

AMP1

wps:<chassis>/<slot>

WPS4

Table 4: Pluggable Transceivers

Entity Name

 

Fault Indicator

Transceiver

Indicator

Status

<transceiver-type>:<chassis>/<slot>/<subslot>/<port>

where transceiver-type corresponds to the type of transceiver installed in the port; for example, cfp, qsfp, qsfp28, or sfpPlus.

CFP, QSFP+, QSFP28, SFP+

Fail LED, transceiver port

On

Clearing an EqptMism Alarm

Note

Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

Note

Refer to the BTI7800 Series Hardware Overview and Installation Guide before replacing equipment.

  1. Retrieve equipment-provisioning information:
    show equipment
  2. Do one of the following:
    • Modify the provisioned settings so that they match those of the installed equipment (equipment, traffic module, or pluggable transceiver). For information, see the BTI7800 Software Configuration Guide.

    • Replace the equipment with equipment that matches the provisioned settings.

  3. Check for alarms on the equipment.
    • If the alarm has cleared, you have completed this procedure.

    • If the alarm does not clear, contact your next level of support.