Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

EqptComm

 

Table 1: Alarm Details

Parameter

Description

Code

eqptComm

Description/Cause

Equipment Management Communications Failure: The CMM is not able to communicate with the equipment.

Entities Affected

Traffic modules (see respective table below).

Default Severity

Major

Service Affecting

Depends on reason alarm has been raised.

Alarm Clearing

See Clearing an EqptComm alarm.

Related Fault Hierarchy

See Equipment fault hierarchy.

Entity Name

 

Fault Indicator

Module

Indicator

Status

cmm:<chassis>/<slot>

CMM

See BTI7800 Series Module and BIC LED Behavior.

ufm:<chassis>/<slot>

UFM

roadm:<chassis>/<slot>

ROADM2

ila:<chassis>/<slot>

ILA

amp:<chassis>/<slot>

AMP1

wps:<chassis>/<slot>

WPS4

Clearing an EqptComm Alarm

Note

Follow all applicable safety requirements as described in the BTI7800 Series Hardware Overview and Installation Guide.

Note

Refer to the BTI7800 Series Software Configuration Guide before rebooting an active CMM.

  1. Perform a warm reboot of the active CMM, and then check for alarms on the affected module.
    • If the alarm has cleared, you have completed this procedure.

    • If the alarm does not clear, go to the next step.

  2. Perform a cold reboot of the active CMM, and then check for alarms on the affected module.
    • If the alarm has cleared, you have completed this procedure.

    • If the alarm does not clear, contact your next level of support.