Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring SNMP

    Use this procedure to configure SNMP community strings and trap receivers.

    1. Configure the community strings.

      Note: In releases lower than release 4.3, you must have superuser privileges to provision SNMP community strings. In releases 4.3 and higher, you can provision SNMP community strings with the provisioning privilege.

      1. Configure the read-only community string.

        For example:

        bti7800(config)# snmp-server community RO password
        bti7800(config-community-RO)# commit 
        Commit complete. 
        bti7800(config-community-RO)# exit 
        bti7800(config)# 
      2. Configure the read-write community string.

        For example:

        bti7800(config)# snmp-server community RW password
        bti7800(config-community-RW)# commit 
        Commit complete. 
        bti7800(config-community-RW)# exit 
        bti7800(config)#  
      3. Display the new configuration.

        For example:

        bti7800(config)# do show running-config snmp-server community
        snmp-server community RW  
         password 
        ! 
        snmp-server community RO  
         password 
        !  
    2. Configure the trap receiver.
      1. Specify the IP address of the trap receiver.

        For example:

        bti7800(config)# snmp-server host 10.1.1.1
        bti7800(config-host-10.1.1.1)# commit 
        Commit complete. 
        bti7800(config-host-10.1.1.1)# exit 
        bti7800(config)#  
      2. Repeat until you have configured all trap receivers.
      3. Display the trap receivers.

        For example:

        bti7800(config)# do show snmp host
        Target-Name   IP-Address   Port   TimeOut-Value   Retry-Count   Tag-List
        ------------- ------------ ------ --------------- ------------- --------
        10.1.1.1 v2   10.1.1.1     162    1500            3             std_v2_t
        10.2.2.2 v2   10.2.2.2     162    1500            3             std_v2_t

    Release History Table

    Release
    Description
    In releases 4.3 and higher, you can provision SNMP community strings with the provisioning privilege.

    Modified: 2017-10-30