Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Module Reload Times

    A fully configured module might take several minutes to start up. Table 1 shows the expected worst-case module reload times for the different modules. The reload time is measured from the time that the reload command is issued to the time when the equipment state is operationally up and all the services on the module are up.

    Table 1: Module Reload Times

    Module

    PEC

    Warm Reload Startup Time

    Cold Reload Startup Time

    UFM3

    BT8A78UFM3

    7 minutes

    7 minutes

    UFM4

    BT8A78UFM4

    7 minutes

    7 minutes

    UFM6

    BT8A78UFM6-I02

    9 minutes

    12 minutes

    WPS4

    BT8A78WPS4

    8 minutes

    6 minutes

    AMP1

    BT8A78AMP1

    8 minutes

    5 minutes

    Note: These measurements were taken in release 4.1 and release 4.2. The reload times might be different in other releases.

    Modified: 2017-10-24