Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Protocol Statistics

    Table 1: OTU Protocol Statistics

    Counter

    Description

    Units

    fec-0cr

    Number of bits corrected to 0

    fec-1cr

    Number of bits corrected to 1

    fec-ber

    FEC bit error rate.

    fec-ber-avg

    FEC bit error rate (average).

    fec-ber-maximum

    FEC bit error rate (maximum).

    fec-ber-minimum

    FEC bit error rate (minimum).

    fec-bitcr

    FEC bits corrected.

    fec-ucrcw

    FEC uncorrectable codewords.

    otu-bbe

    OTU background block errors.

    otu-ber

    OTU bit error rate.

    otu-ber-avg

    OTU bit error rate (average).

    otu-ber-max

    OTU bit error rate (maximum).

    otu-ber-min

    OTU bit error rate (minimum).

    otu-eb

    OTU errored blocks.

    otu-es

    OTU errored seconds.

    s

    otu-ofs

    OTU out of frame seconds.

    s

    otu-ses

    OTU severely errored seconds.

    s

    otu-uas

    OTU unavailable seconds.

    s

    Table 2: ODU Protocol Statistics

    Counter

    Description

    Units

    odu-bbe

    ODU background block errors.

    odu-ber

    ODU bit error rate.

    odu-ber-avg

    ODU bit error rate (average).

    odu-ber-max

    ODU bit error rate (maximum).

    odu-ber-min

    ODU bit error rate (minimum).

    odu-eb

    ODU errored blocks.

    odu-es

    ODU errored seconds.

    s

    odu-ses

    ODU severely errored seconds.

    s

    Table 3: SONET Protocol Statistics

    Counter

    Description

    Units

    ber-l

    Bit error rate instantaneous, line

    ber-avg-l

    Bit error rate average, line

    ber-max-l

    Bit error rate maximum, line

    ber-min-l

    Bit error rate minimum, line

    cv-l

    Coding violations, line

    es-l

    Errored seconds, line

    s

    fc-l

    Failure count, line

    ses-l

    Severely errored seconds, line

    s

    ber-s

    Bit error rate instantaneous, section

    ber-avg-s

    Bit error rate average, section

    ber-max-s

    Bit error rate maximum, section

    ber-min-s

    Bit error rate minimum, section

    cv-s

    Coding violations, section

    es-s

    Errored seconds, section

    s

    sefs-s

    Severely errored frame seconds, section

    s

    ses-l

    Severely errored seconds, section

    s

    Table 4: SDH Protocol Statistics

    Counter

    Description

    Units

    ms-ber

    Bit error rate instantaneous, multiplex section

    ms-ber-avg

    Bit error rate average, multiplex section

    ms-ber-max

    Bit error rate maximum, multiplex section

    ms-ber-min

    Bit error rate minimum, multiplex section

    ms-bbe

    Background block errors, multiplex section

    ms-eb

    Errored blocks, multiplex section

    ms-es

    Errored seconds, multiplex section

    s

    ms-ses

    Severely errored seconds, multiplex section

    s

    rs-ber

    Bit error rate instantaneous, regenerator section

    rs-ber-avg

    Bit error rate average, regenerator section

    rs-ber-max

    Bit error rate maximum, regenerator section

    rs-ber-min

    Bit error rate minimum, regenerator section

    rs-bbe

    Background block errors, regenerator section

    rs-eb

    Errored blocks, regenerator section

    rs-es

    Errored seconds, regenerator section

    s

    rs-ofs

    Out of frame seconds, regenerator section

    s

    rs-ses

    Severely errored seconds, regenerator section

    s

    Table 5: Ethernet Layer 1 Statistics

    Counter

    Description

    Units

    pcs-ses

    Severely errored seconds.

    The number of seconds during which any of the following occurs on the Ethernet interface or on a channel of the Ethernet interface:

    • Loss of Signal
    • Loss of Sync

    s

    Table 6: Ethernet Layer 2 Statistics

    Counter

    Description

    Units

    bcast-pkts-rx

    Broadcast packets received.

    The number of packets received excluding bad packets that are directed to a broadcast address.

    bcast-pkts-tx

    Broadcast packets transmitted.

     

    drp-pkts-rx

    Dropped packets received.

    The number of packets that should be received by the device, but are not accepted due to an internal MAC sublayer receive error (that is, FIFO overrun).

    fcse-pkts-rx

    FCS error packets received.

    The number of packets received with a valid length but have either a bad Frame Check Sequence (FCS) or a bad FCS with a non-integral number of octets (Alignment Error).

    fragments-rx

    Fragments received.

     

    jabbers-rx

    Jabbers received.

    The number of packets received that are longer than the maximum permitted packet size and have a bad Frame Check Sequence (FCS).

    mcast-pkts-rx

    Multicast packets received.

    The number of packets received excluding bad packets that are directed to a unicast address.

    mcast-pkts-tx

    Multicast packets transmitted.

     

    octs-ok-rx

    Good octets received.

    The total number of octets received excluding those counted in bad packets.

    octs-ok-tx

    Good octets transmitted.

     

    octs-rx

    Total octets received.

    The total number of octets received including those counted in bad packets.

    osize-pkts-rx

    Oversized packets received.

    The number of packets received with more octets than the maximum permitted packet size (9600) and without errors.

    pkts-paus-rx

    Pause packets received.

     

    pkts-ok-rx

    Good packets received.

    The total number of packets received excluding bad packets.

    pkts-ok-tx

    Good packets transmitted.

     

    pkts-rx

    Total packets received.

    The total number of packets received including bad packets.

    pkts-tx

    Total packets transmitted.

    The total number of packets transmitted.

    pkts-64-oct-rx

    64 byte packets received.

    The total number of packets (including bad packets) received that are 64 octets in length (excluding framing bits but including FCS octets).

    pkts-65-127-oct-rx

    65 to 127 byte packets received.

    The total number of packets (including bad packets) received that are between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).

    pkts-128-255-oct-rx

    128 to 255 byte packets received.

    The total number of packets (including bad packets) received that are between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).

    pkts-256-511-oct-rx

    256 to 511 byte packets received.

    The total number of packets (including bad packets) received that are between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

    pkts-512-1023-oct-rx

    512 to 1023 byte packets received.

    The total number of packets (including bad packets) received that str between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

    pkts-1024-1518-oct-rx

    1024 to 1518 byte packets received.

    The total number of packets (including bad packets) received that are between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

    pkts-over-1518-oct-rx

    Packets over 1518 bytes received.

    The total number of packets (including bad packets) received that are between 1518 octets and the maximum Jumbo frame length (9600 octets), excluding framing bits but including FCS octets.

    usize-pkts-rx

    Undersized packets received.

    The number of packets received with fewer octets than the minimum permitted packet size (64) and without errors.

    Table 7: Fibre Channel Statistics

    Counter

    Description

    Units

    pcs-ses

    Severely errored seconds.

    The number of seconds during which any of the following occurs on the Fibre channel interface:

    • High BER
    • Loss of Signal
    • Loss of Sync
    • 8554 or more invalid blocks (applies to 10gfc interfaces)
    • 6845 or more invalid blocks (applies to 8gfc interfaces)

    The PCS-SES count is not incremented during seconds which are counted as PCS-UAS seconds.

    s

    pktsfcserx

    FCSE packets.

    The number of packets received that had a valid length but had either a bad Frame Check Sequence (FCS) or a bad FCS with a non-integral number of octets (Alignment Error).

    Modified: 2017-10-26