Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

    • show running-config system radius
     

    system radius

    Syntax

    [no] system radius options { attempts number } | { timeout seconds }
    [no] system radius server ip_address [ authentication-port number | shared-secret string ]

    Release Information

    This command was introduced prior to release 2.1.1.

    Starting with release 4.3, you can issue this command with the provisioning privilege. In releases lower than release 4.3, you must have superuser privileges to issue this command.

    Description

    This command configures the settings for connecting to a RADIUS server.

    Options

    Table 1: RADIUS Configuration Parameters

    Parameter

    Description

    Range

    Default

    attempts number

    The number of attempts to contact a RADIUS server before attempting to contact the next configured RADIUS server

    1 to 255

    2

    timeout seconds

    The number of seconds the client waits for a response from the RADIUS server before sending another request to the RADIUS server

    1 to 255

    5

    server ip_address

    The IP address of the RADIUS server

    A valid IP address in dotted decimal format (for example, 10.1.1.1)

    None

    authentication-port number

    The UDP port number to use

    Note: The port number must not be changed from the default value.

    1812

    1812

    shared-secret string

    The authentication key used to connect to the RADIUS server and to encrypt user credentials

    Note: The key on the RADIUS client and RADIUS server must match.

    The key must be 6-256 case-sensitive alphanumeric characters

    None

    Additional Information

    You can specify multiple RADIUS servers by issuing this command for each server. The BTI7800 attempts to connect to the first RADIUS server entered. If the BTI7800 fails to connect to the server after the specified number of attempts and timeouts, the BTI7800 tries the next server in the list, and so on.

    Required Privilege Level

     

    Related Documentation

    • show running-config system radius
     

    Modified: 2017-10-30