show equipment module
Syntax
Description
This command displays provisioned modules and provisioned equipment that the modules contain (at varying levels of specificity).
Options
Parameter | Description | Range | Default |
|---|---|---|---|
chassis_id | Restricts displayed equipment to the specified chassis. Note: The information displayed for the same equipment differs slightly depending on whether the chassis is or is not specified. See examples below. | A valid chassis identifier (for example, chassis:1) | If no chassis is specified, the displayed equipment can be from any chassis. |
module [module_id] | Restricts displayed equipment to the specified module. | A valid module identifier (for example, ufm:1/3) | If no module is specified, the displayed equipment can be from any module. |
bic [bic_id] | Restricts displayed equipment to the specified BIC. This option is only available if the containing module is a UFM. | A valid BIC identifier (for example, bic:1/3/1) for the specified module | If no BIC is specified, the displayed equipment can be from any BIC. |
transceiver [transceiver_id] | Restricts displayed equipment to the specified transceiver. This option is only available if the containing module is a UFM. | A valid transceiver identifier (for example, cfp:1/3/2/1) for the specified BIC or UFM | If no transceiver is specified, the displayed equipment can be from any transceiver. |
operational-status [status] | Restricts displayed equipment to the specified operational status. | The following are the valid status values:
| If no status is specified, the displayed equipment can contain any operational status. |
Additional Information
The operational state or status can take on the following values:
- up - The specified equipment is present, administratively enabled, and functioning normally.
- down - The specified equipment is either administratively disabled, mismatched, or alarmed with a fault that makes it unable to provide its provisioned function.
- notPresent - The equipment is not present in the location for which it is provisioned.
- lowerLayerDown - Supporting equipment is reporting an operational state of down.
- unknown - The operational state of the specified equipment cannot be determined, possibly because it is rebooting.
Required Privilege Level
Sample Output
To display all modules:
bti7800# show equipment module Module PEC Admin State Oper State Custom1 Custom2 Custom3 ---------- -------------- ----------- ---------- ------- ------- ------- amp:1/4 BT8A78AMP1 enabled down cmm:1/A BT8A78CMM1 enabled up cmm:1/B BT8A78CMM1 enabled up fan:1/1 BT8A78FAN1 enabled up fan:1/2 BT8A78FAN1 enabled up fan:1/3 BT8A78FAN1 enabled up fan:1/4 BT8A78FAN1 enabled up fan:1/5 BT8A78FAN5 enabled up fan:1/6 BT8A78FAN5 enabled up ila:1/5 BT8A78AMPL enabled down pem:1/1 BT8A78PEM3-DC enabled up pem:1/2 BT8A78PEM3-DC enabled up roadm:1/8 BT8A78RDM2 enabled down roadm:1/9 BT8A78RDM2 enabled down ufm:1/1 BT8A78UFM3 enabled down ufm:1/3 BT8A78UFM3 enabled up ufm:1/10 BT8A78UFM3 enabled down ufm:1/13 BT8A78UFM4 enabled down wps:1/12 BT8A78WPS4 enabled down
To display all transceivers on a specific BIC:
bti7800# show equipment chassis:1 module ufm:1/3 bic
bic:1/3/1 transceiver Transceiver PEC Optical-Format Admin Oper Custom1 Custom2 Custom3 ------------------ -------------- --------------- -------- ---- ------- ------- ------- sfpPlus:1/3/1/1 fixedX1 up up sfpPlus:1/3/1/2 fixedX1 up up sfpPlus:1/3/1/3 fixedX1 up up sfpPlus:1/3/1/4 fixedX1 up up sfpPlus:1/3/1/5 fixedX1 up up sfpPlus:1/3/1/6 fixedX1 up up sfpPlus:1/3/1/7 tunableX1 up up sfpPlus:1/3/1/8 tunableX1 up up sfpPlus:1/3/1/9 tunableX1 up up sfpPlus:1/3/1/10 tunableX1 up up sfpPlus:1/3/1/11 tunableX1 up up sfpPlus:1/3/1/12 tunableX1 up up
