Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

    • None
     

    prbs-mode

    Syntax

    [no] prbs-mode { egress | ingress | no-prbs }

    Description

    This command configures PRBS signal generation.

    Options

    Required Privilege Level

     

    Related Documentation

    • None
     

    Sample Output

    bti7800(config)# interface otu4:1/7/1/1
    bti7800(config-interface-otu4:1/7/1/1)# disabled 
    bti7800(config-interface-otu4:1/7/1/1)# prbs-mode egress 
    bti7800(config-interface-otu4:1/7/1/1)# commit  

    The outputs of the following commands have been edited and formatted for clarity. Only the relevant attributes are shown.

    bti7800# show interface otu4:1/7/1/1
    Admin State                             : disabled   
    Operational State                       : testing   
    PRBS Mode                               : egress   
    PRBS Status                             : synchronized   
    Conditions                              : PRBS test active  
    bti7800# show statistics current otu4:1/7/1/1
    PRBS loss of sequence sync. seconds ...  0   
    PRBS bit errors .......................  0   
    PRBS bit error ratio ..................  0   
    PRBS min. bit error ratio .............  0   
    PRBS max. bit error ratio .............  0   
    PRBS avg. bit error ratio .............  0  

    Modified: 2017-10-24