TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

system clock

system clock set-date-time date-time

This command sets the system clock.

Use this command to set the date and time if you are not using NTP servers.

Parameter	Description	Range	Default Value
date-time	The date and the time to set	<YYYY>-<MM>-<DD>T<HH>:<MM>:<SS> <YYYY> = year <MM> = month {01-12} <DD> = day {01-31} Literal T separates data and time. <HH> = hour {00-23} <MM> = minute {00-59} <SS> = second {00-59}	–

Parameter

Description

Range

Default Value

date-time

The date and the time to set

<YYYY>-<MM>-<DD>T<HH>:<MM>:<SS>

<YYYY> = year

<MM> = month {01-12}

<DD> = day {01-31}

Literal T separates data and time.

<HH> = hour {00-23}

<MM> = minute {00-59}

<SS> = second {00-59}

–

See the BTI7800 Series Software Configuration Guide for information on the following:

For the time change to take effect, you must warm reload the CMMs after changing the time. See Setting the Date and Time.
Changing the time affects PM timestamps. See Effect of a Time Change on PMs.

bti7800# system clock set-date-time 2015-01-28T13:33:00

NOTE: If the system is using NTP, date and time would be overridden by NTP. Proceed? [no,yes] yes
bti7800#