Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

    • None
     

    autowizard

    Syntax

    autowizard [ true | false ]

    Description

    This command enables the CLI to prompt you for mandatory parameters during configuration.

    By default, autowizard is set to true, which means that the CLI prompts you for mandatory parameters if you neglect to specify them.

    If you disable autowizard, the CLI does not prompt you for mandatory parameters. If you neglect to configure the mandatory parameters, the commit command fails.

    Note: If you intend to use the running-config output as input to the CLI, you should disable autowizard (set to false).

    Options

    Required Privilege Level

     

    Related Documentation

    • None
     

    Sample Output

    Here is an example where autowizard is set to true. The CLI prompts for the mandatory type parameter.

    bti7800# autowizard true
    bti7800# config
    Entering configuration mode terminal
    bti7800(config)# interface 10ge:1/3/1/1
    Value for 'type' [ethernetCsmacd,opticalChannel,otnOdu,otnOtu,...]: ethernetCsmacd
    bti7800(config-interface-10ge:1/3/1/1)# commit
    Commit complete.
    

    Here is an example where autowizard is set to false. The commit fails because the mandatory type parameter is not configured.

    bti7800# autowizard false
    bti7800# config
    Entering configuration mode terminal
    bti7800(config)# interface 10ge:1/3/1/7 
    bti7800(config-interface-10ge:1/3/1/7)# commit
    Aborted: 'interface 10ge:1/3/1/7 type' is not configured 
    

    Modified: 2017-10-24