dol port
Syntax
Description
This command sets parameters for the specified DOL port.
 | Note: Ports are automatically created on a DOL module when the module is added, and automatically deleted when the module is deleted. You do not need to create or delete ports explicitly. |
A DOL port can be any of the following:
- a ROADM client, line, or PRE port
- an ILA client, line, or PRE port
- a port on the PRE module
- a multiplexer/demultiplexer client or line port
When a port is created on a ROADM or ILA module, the corresponding OMS and OSC are automatically created. When a port is deleted on a ROADM or ILA module, the corresponding OMS and OSC are automatically deleted.
Options
Parameter | Description | Range | Default Value |
|---|---|---|---|
port:location_id | The port identifier. The location identifier consists of the chassi, module, and port locations. | ROADM/ILA:
PRE:
multiplexer/demultiplexer:
| None |
custom1, custom2, custom3 string | Customizable text field for operator's use | 0 to 255 characters | An empty string |
ol-id string | Customizable text identifying the optical layer managed object | 0 to 32 characters | An empty string |
Required Privilege Level
Sample Output
The following sets the optical layer identifier:
bti7800(config)# dol port:1/2/0/L1 ol-id nyc-2-L1 bti7800(config-dol-port:1/2/0/L1)# commit Commit complete.
