Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    amp eqpt-conn


    [no] amp eqpt-conn <port-type>:<chassis-number>/<slot-number>/BIC-1/<port-number>


    This command configures intra-group optical fiber patch connections between the amplifier and multiplexer/demultiplexer, DCM, and ROADM line ports.


    Required Privilege Level

    Sample Output

    This example assumes that the 96-Channel Amplifier is configured and a DCM and multiplexer/demultiplexer are associated with the amplifier. Refer to the example for the command amp eqpt.

    The following example configures a fiber patch connection between the 96-Channel Amplifier, a DCM and Mux/Demux:

    The export value represents the configured DCM ID 0/1, and is considered the Source port.

    The line value represents the configured Mux/Demux ID 0/2, and is considered the Destination port.

    bti7800(config)# amp eqpt-conn dcm:1/8/1/1 export:0/1/1/1
    bti7800(config-eqpt-conn-dcm:1/8/1/1/export:0/1/1/1)# commit 
    Commit complete.  
    bti7800(config)# amp eqpt-conn client:1/8/1/1 line:0/2/1/1 
    bti7800(config-eqpt-conn-client:1/8/1/1/line:0/2/1/1)# exit 
    bti7800(config)# commit 
    Commit complete. 

    Modified: 2017-10-24